On 04/11/2012 02:03 AM, Hao, Xudong wrote:
(Re-rend.)
For IvyBridge Mobile platform, a system hang may occur if a FLR(Function Level Reset) is asserted to internal graphics.
This quirk patch is workaround for the IVB FLR errata issue.
We are disabling the FLR reset handshake between the PCH and CPU display, then manually powering down the panel power sequencing and resetting the PCH display.
Changes from v3:
- add X86 configuration to avoid compile problem in other architecture.
Signed-off-by: Xudong Hao<xudong.hao@xxxxxxxxx>
Signed-off-by: Kay, Allen M<allen.m.kay@xxxxxxxxx>
Reviewed-by: Xiantao Zhang<xiantao.zhang@xxxxxxxxx>
---
drivers/pci/quirks.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 59 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6476547..63e8b70 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3069,11 +3069,70 @@ static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
return 0;
}
+#ifdef CONFIG_X86
+
+#include "../gpu/drm/i915/i915_reg.h"
+#define MSG_CTL 0x45010
+
+static const int op_timeout = 10; /* set timeout 10 seconds */
+static int reset_ivb_igd(struct pci_dev *dev, int probe) {
+ u8 *mmio_base;
+ u32 val;
+ cycles_t cyc_op_timeout = tsc_khz*op_timeout*1000;
+
Don't we know how to do a 10sec timeout w/o tying it to tsc_khz?
--> other arch compile problem source???
+ if (probe)
+ return 0;
+
+ mmio_base = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
+ if (!mmio_base)
+ return -ENOMEM;
+
+ /* Work Around */
+ *((u32 *)(mmio_base + MSG_CTL)) = 0x00000002;
+ /* Clobbering SOUTH_CHICKEN2 register is fine only if the next
+ * driver loaded sets the right bits. However, this's a reset and
+ * the bits have been set by i915 previously, so we clobber
+ * SOUTH_CHICKEN2 register directly here.
+ */
+ *((u32 *)(mmio_base + SOUTH_CHICKEN2)) = 0x00000005;
+ val = *((u32 *)(mmio_base + PCH_PP_CONTROL))& 0xfffffffe;
+ *((u32 *)(mmio_base + PCH_PP_CONTROL)) = val;
above should use readl() & writel()
.... and once this & above fixed, then it'll work on other arches???
+ do {
+ cycles_t start_time = get_cycles();
+ while (1) {
+ val = *((u32 *)(mmio_base + PCH_PP_STATUS));
+ if (((val& 0x80000000) == 0)
+ && ((val& 0x30000000) == 0))
+ break;
+ if (cyc_op_timeout< (get_cycles() - start_time))
+ break;
+ cpu_relax();
+ }
+ } while (0);
+ *((u32 *)(mmio_base + 0xd0100)) = 0x00000002;
+
+ iounmap(pci_resource_start(dev, 0));
+ return 0;
+}
+#else
+static int reset_ivb_igd(struct pci_dev *dev, int probe) { }
+#endif /* CONFIG_X86 */
+
#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
+#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
+#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
reset_intel_82599_sfp_virtfn },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA,
+ reset_ivb_igd },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA,
+ reset_ivb_igd },
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
reset_intel_generic_dev },
{ 0 }
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
