Hi Shuai,
I have a few comments below
On Sat, 4 Nov 2023, Shuai Xue wrote:
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).
To facilitate collection of statistics the controller provides the
following two features for each Root Port:
- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)
Note: There is no interrupt for counter overflow.
This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,
30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
the PMU device name for this Root Port is dwc_rootport_3018.
Example usage of counting PCIe RX TLP data payload (Units of bytes)::
$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
average RX bandwidth can be calculated like this:
PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
Signed-off-by: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Reviewed-by: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
---
drivers/perf/Kconfig | 7 +
drivers/perf/Makefile | 1 +
drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++++++++++++++++++++
3 files changed, 806 insertions(+)
create mode 100644 drivers/perf/dwc_pcie_pmu.c
...
diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
new file mode 100644
index 000000000000..9485c41de322
--- /dev/null
+++ b/drivers/perf/dwc_pcie_pmu.c
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Synopsys DesignWare PCIe PMU driver
+ *
+ * Copyright (C) 2021-2023 Alibaba Inc.
+ */
+
...
+static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
+ bool enable)
+{
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+
+ if (enable)
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+ DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
+ else
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+ DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
It's a matter of taste, but you could simply do:
pci_clear_and_set_dword(pdev,
ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
DWC_PCIE_TIME_BASED_TIMER_START, enable);
However, I'm fine with either way.
+static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+ u32 val;
+
+ pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
+
+ return val;
+}
...
+static int dwc_pcie_register_dev(struct pci_dev *pdev)
+{
+ struct platform_device *plat_dev;
+ struct dwc_pcie_dev_info *dev_info;
+ int ret;
+ u32 bdf;
+
+ bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+ plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
+ pdev, sizeof(*pdev));
+ ret = PTR_ERR_OR_ZERO(plat_dev);
+ if (ret)
+ return ret;
platform_device_register_data() doesn't return a null pointer and you
don't really need 'ret'. You could do something like instead:
if (IS_ERR(plat_dev))
return PTR_ERR(plat_dev);
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info)
+ return -ENOMEM;
+
+ /* Cache platform device to handle pci device hotplug */
+ dev_info->plat_dev = plat_dev;
+ dev_info->pdev = pdev;
+ list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
+
+ return 0;
+}
+
+static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dwc_pcie_dev_info *dev_info;
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (!dwc_pcie_match_des_cap(pdev))
+ return NOTIFY_DONE;
+ if (dwc_pcie_register_dev(pdev))
+ return NOTIFY_BAD;
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ dev_info = dwc_pcie_find_dev_info(pdev);
+ if (!dev_info)
+ return NOTIFY_DONE;
+ dwc_pcie_unregister_dev(dev_info);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block dwc_pcie_pmu_nb = {
+ .notifier_call = dwc_pcie_pmu_notifier,
+};
+
+static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
+{
+ struct pci_dev *pdev = plat_dev->dev.platform_data;
+ struct dwc_pcie_pmu *pcie_pmu;
+ char *name;
+ u32 bdf, val;
+ u16 vsec;
+ int ret;
+
+ vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
+ DWC_PCIE_VSEC_RAS_DES_ID);
You nicely changed to use vendor list in this version but here the driver
still tries to find Alibaba specific capability. I guess, you could search
again using the vendor list. The other option would be to make
dwc_pcie_match_des_cap() to return the vendor id, pass it to
dwc_pcie_register_dev(), which would add it to device's platform data with
the pointer to the pci device.
Cheers, Ilkka
+ pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
+ bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+ name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
+ if (!name)
+ return -ENOMEM;
+
+ pcie_pmu = devm_kzalloc(&plat_dev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
+ if (!pcie_pmu)
+ return -ENOMEM;
+
+ pcie_pmu->pdev = pdev;
+ pcie_pmu->ras_des_offset = vsec;
+ pcie_pmu->nr_lanes = pcie_get_width_cap(pdev);
+ pcie_pmu->on_cpu = -1;
+ pcie_pmu->pmu = (struct pmu){
+ .name = name,
+ .parent = &pdev->dev,
+ .module = THIS_MODULE,
+ .attr_groups = dwc_pcie_attr_groups,
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ .task_ctx_nr = perf_invalid_context,
+ .event_init = dwc_pcie_pmu_event_init,
+ .add = dwc_pcie_pmu_event_add,
+ .del = dwc_pcie_pmu_event_del,
+ .start = dwc_pcie_pmu_event_start,
+ .stop = dwc_pcie_pmu_event_stop,
+ .read = dwc_pcie_pmu_event_update,
+ };
+
+ /* Add this instance to the list used by the offline callback */
+ ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
+ &pcie_pmu->cpuhp_node);
+ if (ret) {
+ pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
+ return ret;
+ }
+
+ /* Unwind when platform driver removes */
+ ret = devm_add_action_or_reset(&plat_dev->dev,
+ dwc_pcie_pmu_remove_cpuhp_instance,
+ &pcie_pmu->cpuhp_node);
+ if (ret)
+ return ret;
+
+ ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
+ if (ret) {
+ pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
+ return ret;
+ }
+ ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
+ pcie_pmu);
+ if (ret)
+ return ret;
+
+ return 0;
+}
