On Tue, Oct 31, 2023 at 10:41:48AM +0530, Mrinmay Sarkar wrote:
> Add ep pcie dtsi node for pcie0 controller found on sa8775p platform.
> It supports gen4 and x2 link width. Limiting the speed to Gen3 due to
> stability issues.
>
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
One question below:
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 46 +++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 13dd44d..7eab458 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -3586,6 +3586,52 @@
> status = "disabled";
> };
>
> + pcie0_ep: pcie-ep@1c00000 {
> + compatible = "qcom,sa8775p-pcie-ep";
> + reg = <0x0 0x01c00000 0x0 0x3000>,
> + <0x0 0x40000000 0x0 0xf20>,
> + <0x0 0x40000f20 0x0 0xa8>,
> + <0x0 0x40001000 0x0 0x4000>,
> + <0x0 0x40200000 0x0 0x100000>,
> + <0x0 0x01c03000 0x0 0x1000>,
> + <0x0 0x40005000 0x0 0x2000>;
> + reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> + "mmio", "dma";
> +
> + clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> + <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
> +
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a";
> +
> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interrupt-names = "global", "doorbell", "dma";
> +
> + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
> + interconnect-names = "pcie-mem", "cpu-pcie";
> +
> + iommus = <&pcie_smmu 0x0000 0x7f>;
SID is really 0?
- Mani
> + resets = <&gcc GCC_PCIE_0_BCR>;
> + reset-names = "core";
> + power-domains = <&gcc PCIE_0_GDSC>;
> + phys = <&pcie0_phy>;
> + phy-names = "pciephy";
> + max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
> + num-lanes = <2>;
> +
> + status = "disabled";
> + };
> +
> pcie0_phy: phy@1c04000 {
> compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
> reg = <0x0 0x1c04000 0x0 0x2000>;
> --
> 2.7.4
>
--
மணிவண்ணன் சதாசிவம்
