Minda Chen wrote:
>
>
> On 2023/9/19 19:34, Emil Renner Berthing wrote:
> > Minda Chen wrote:
> >>
> >>
> >> On 2023/9/18 6:13, Emil Renner Berthing wrote:
> >> > Minda Chen wrote:
> >> >> Add StarFive JH7110 SoC PCIe controller platform
> >> >> driver codes, and add host init/deinit to pcie-plda-host.c
> >> >>
> >> >> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> >> >> Co-developed-by: Kevin Xie <kevin.xie@xxxxxxxxxxxxxxxx>
> >> >> Reviewed-by: Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>
> >> >> ---
> >> >> MAINTAINERS | 7 +
> >> >> drivers/pci/controller/plda/Kconfig | 12 +
> >> >> drivers/pci/controller/plda/Makefile | 1 +
> >> >> drivers/pci/controller/plda/pcie-plda-host.c | 121 ++++-
> >> >> drivers/pci/controller/plda/pcie-plda.h | 91 +++-
> >> >> drivers/pci/controller/plda/pcie-starfive.c | 461 +++++++++++++++++++
> >> >> 6 files changed, 688 insertions(+), 5 deletions(-)
> >> >> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >> >>
> >> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> >> index ebdb65e195ee..4632cd411a3d 100644
> >> >> --- a/MAINTAINERS
> >> >> +++ b/MAINTAINERS
> >> >> @@ -16679,6 +16679,13 @@ S: Maintained
> >> >> F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> >> >> F: drivers/pci/controller/dwc/pcie-uniphier*
> >> >>
> >> >> +PCIE DRIVER FOR STARFIVE JH71x0
> >> >> +M: Kevin Xie <kevin.xie@xxxxxxxxxxxxxxxx>
> >> >> +L: linux-pci@xxxxxxxxxxxxxxx
> >> >> +S: Maintained
> >> >> +F: Documentation/devicetree/bindings/pci/starfive*
> >> >> +F: drivers/pci/controller/plda/pcie-starfive.c
> >> >> +
> >> >> PCIE DRIVER FOR ST SPEAR13XX
> >> >> M: Pratyush Anand <pratyush.anand@xxxxxxxxx>
> >> >> L: linux-pci@xxxxxxxxxxxxxxx
> >> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> >> >> index e54a82ee94f5..8de661730aa5 100644
> >> >> --- a/drivers/pci/controller/plda/Kconfig
> >> >> +++ b/drivers/pci/controller/plda/Kconfig
> >> >> @@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
> >> >> Say Y here if you want kernel to support the Microchip AXI PCIe
> >> >> Host Bridge driver.
> >> >>
> >> >> +config PCIE_STARFIVE_HOST
> >> >> + tristate "StarFive PCIe host controller"
> >> >> + depends on OF && PCI_MSI
> >> >> + select PCIE_PLDA_HOST
> >> >> + help
> >> >> + Say Y here if you want to support the StarFive PCIe controller
> >> >> + in host mode. StarFive PCIe controller uses PLDA PCIe
> >> >> + core.
> >> >> + If you choose to build this driver as module it will
> >> >> + be dynamically linked and module will be called
> >> >> + pcie-starfive.ko
> >> >> +
> >> >> endmenu
> >> >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> >> >> index 4340ab007f44..0ac6851bed48 100644
> >> >> --- a/drivers/pci/controller/plda/Makefile
> >> >> +++ b/drivers/pci/controller/plda/Makefile
> >> >> @@ -1,3 +1,4 @@
> >> >> # SPDX-License-Identifier: GPL-2.0
> >> >> obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> >> >> obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> >> >> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> >> >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> index 26e6cfd2eaba..8b32df477ad8 100644
> >> >> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> >> >> @@ -20,6 +20,15 @@
> >> >>
> >> >> #include "pcie-plda.h"
> >> >>
> >> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> >> >> + int where)
> >> >> +{
> >> >> + struct plda_pcie_rp *pcie = bus->sysdata;
> >> >> +
> >> >> + return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
> >> >> +
> >> >> static void plda_handle_msi(struct irq_desc *desc)
> >> >> {
> >> >> struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
> >> >> @@ -370,6 +379,12 @@ static const struct plda_event_ops plda_event_ops = {
> >> >> .get_events = plda_get_events,
> >> >> };
> >> >>
> >> >> +static const struct plda_event plda_default_event = {
> >> >> + .event_ops = &plda_event_ops,
> >> >> + .intx_event = EVENT_PM_MSI_INT_INTX,
> >> >> + .msi_event = EVENT_PM_MSI_INT_MSI
> >> >> +};
> >> >> +
> >> >> static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
> >> >> const struct irq_domain_ops *ops)
> >> >> {
> >> >> @@ -416,7 +431,6 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >> const struct plda_event *event)
> >> >> {
> >> >> struct device *dev = &pdev->dev;
> >> >> - int irq;
> >> >> int i, intx_irq, msi_irq, event_irq;
> >> >> int ret;
> >> >> const struct irq_domain_ops *irq_dom_ops;
> >> >> @@ -434,8 +448,8 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >> return ret;
> >> >> }
> >> >>
> >> >> - irq = platform_get_irq(pdev, 0);
> >> >> - if (irq < 0)
> >> >> + port->irq = platform_get_irq(pdev, 0);
> >> >> + if (port->irq < 0)
> >> >> return -ENODEV;
> >> >
> >> > Here you're dropping the local variable irq and just use port->irq directly..
> >> >
> >> >>
> >> >> port->event_ops = event->event_ops;
> >> >> @@ -465,6 +479,7 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >> dev_err(dev, "failed to map INTx interrupt\n");
> >> >> return -ENXIO;
> >> >> }
> >> >> + port->intx_irq = intx_irq;
> >> >
> >> > ..but for intx_irq..
> >> >
> >> >>
> >> >> /* Plug the INTx chained handler */
> >> >> irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
> >> >> @@ -473,12 +488,13 @@ int plda_init_interrupts(struct platform_device *pdev,
> >> >> event->msi_event);
> >> >> if (!msi_irq)
> >> >> return -ENXIO;
> >> >> + port->msi_irq = msi_irq;
> >> >
> >> > ..and msi_irq you're keeping the local variable. I think you should drop
> >> > the local variables here too, or at least do the same for all of them.
> >> >
> >> OK, remove all the local variables is better.
> >> >>
> >> >> /* Plug the MSI chained handler */
> >> >> irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
> >> >>
> >> >> /* Plug the main event chained handler */
> >> >> - irq_set_chained_handler_and_data(irq, plda_handle_event, port);
> >> >> + irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
> >> >>
> >> >> return 0;
> >> >> }
> >> >> @@ -544,3 +560,100 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >> >> return 0;
> >> >> }
> >> >> EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> >> >> +
> >> >> +static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> + irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> >> >> + irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
> >> >> + irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
> >> >> +
> >> >> + irq_domain_remove(pcie->msi.msi_domain);
> >> >> + irq_domain_remove(pcie->msi.dev_domain);
> >> >> +
> >> >> + irq_domain_remove(pcie->intx_domain);
> >> >> + irq_domain_remove(pcie->event_domain);
> >> >> +}
> >> >> +
> >> >> +int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
> >> >> +{
> >> >> + struct resource *cfg_res;
> >> >> + struct device *dev = port->dev;
> >> >> + int ret;
> >> >> + struct pci_host_bridge *bridge;
> >> >> + struct platform_device *pdev = to_platform_device(dev);
> >> >
> >> > This looks weird. Please order initialized variables first and maybe even do
> >> > reverse christmas tree order. Eg. longeist lines first.
> >> >
> >> OK, The same with other places.
> >> >> +
> >> >> + port->bridge_addr =
> >> >> + devm_platform_ioremap_resource_byname(pdev, "apb");
> >> >> +
> >> >> + if (IS_ERR(port->bridge_addr))
> >> >> + return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
> >> >> + "failed to map reg memory\n");
> >> >> +
> >> >> + cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> >> >> + if (!cfg_res)
> >> >> + return dev_err_probe(dev, -ENODEV,
> >> >> + "failed to get config memory\n");
> >> >> +
> >> >> + port->config_base = devm_ioremap_resource(dev, cfg_res);
> >> >> + if (IS_ERR(port->config_base))
> >> >> + return dev_err_probe(dev, PTR_ERR(port->config_base),
> >> >> + "failed to map config memory\n");
> >> >> +
> >> >> + port->phy = devm_phy_optional_get(dev, NULL);
> >> >> + if (IS_ERR(port->phy))
> >> >> + return dev_err_probe(dev, PTR_ERR(port->phy),
> >> >> + "failed to get pcie phy\n");
> >> >> +
> >> >> + bridge = devm_pci_alloc_host_bridge(dev, 0);
> >> >> + if (!bridge)
> >> >> + return dev_err_probe(dev, -ENOMEM,
> >> >> + "failed to alloc bridge\n");
> >> >> +
> >> >> + if (port->host_ops && port->host_ops->host_init) {
> >> >> + ret = port->host_ops->host_init(port);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> + }
> >> >> +
> >> >> + port->bridge = bridge;
> >> >> + plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
> >> >> + resource_size(cfg_res));
> >> >> + plda_pcie_setup_iomems(bridge, port);
> >> >> + plda_set_default_msi(&port->msi);
> >> >> + ret = plda_init_interrupts(pdev, port, &plda_default_event);
> >> >> + if (ret)
> >> >> + goto err_host;
> >> >> +
> >> >> + /* Set default bus ops */
> >> >> + bridge->ops = ops;
> >> >> + bridge->sysdata = port;
> >> >> +
> >> >> + ret = pci_host_probe(bridge);
> >> >> + if (ret < 0) {
> >> >> + dev_err(dev, "failed to pci host probe: %d\n", ret);
> >> >
> >> > I think you mean:
> >> >
> >> > dev_err_probe(dev, ret, "failed to probe pci host\n");
> >> >
> >> I check with dev_err_probe, It is better than dev_err, I will replace this.
> >> >> + goto err_probe;
> >> >> + }
> >> >> +
> >> >> + return ret;
> >> >> +
> >> >> +err_probe:
> >> >> + plda_pcie_irq_domain_deinit(port);
> >> >> +err_host:
> >> >> + if (port->host_ops && port->host_ops->host_deinit)
> >> >> + port->host_ops->host_deinit(port);
> >> >> +
> >> >> + return ret;
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_init);
> >> >> +
> >> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *port)
> >> >> +{
> >> >> + pci_stop_root_bus(port->bridge->bus);
> >> >> + pci_remove_root_bus(port->bridge->bus);
> >> >> +
> >> >> + plda_pcie_irq_domain_deinit(port);
> >> >> +
> >> >> + if (port->host_ops && port->host_ops->host_deinit)
> >> >> + port->host_ops->host_deinit(port);
> >> >> +}
> >> >> +EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
> >> >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> >> >> index b7420598a326..e571047d7944 100644
> >> >> --- a/drivers/pci/controller/plda/pcie-plda.h
> >> >> +++ b/drivers/pci/controller/plda/pcie-plda.h
> >> >> @@ -6,14 +6,24 @@
> >> >> #ifndef _PCIE_PLDA_H
> >> >> #define _PCIE_PLDA_H
> >> >>
> >> >> +#include <linux/phy/phy.h>
> >> >> +
> >> >> /* Number of MSI IRQs */
> >> >> #define PLDA_MAX_NUM_MSI_IRQS 32
> >> >>
> >> >> /* PCIe Bridge Phy Regs */
> >> >> +#define GEN_SETTINGS 0x80
> >> >> +#define RP_ENABLE 1
> >> >> +#define PCIE_PCI_IDS_DW1 0x9c
> >> >> +#define IDS_CLASS_CODE_SHIFT 16
> >> >> #define PCIE_PCI_IRQ_DW0 0xa8
> >> >> #define MSIX_CAP_MASK BIT(31)
> >> >> #define NUM_MSI_MSGS_MASK GENMASK(6, 4)
> >> >> #define NUM_MSI_MSGS_SHIFT 4
> >> >> +#define PCI_MISC 0xb4
> >> >> +#define PHY_FUNCTION_DIS BIT(15)
> >> >> +#define PCIE_WINROM 0xfc
> >> >> +#define PREF_MEM_WIN_64_SUPPORT BIT(3)
> >> >>
> >> >> #define IMASK_LOCAL 0x180
> >> >> #define DMA_END_ENGINE_0_MASK 0x00000000u
> >> >> @@ -64,6 +74,8 @@
> >> >> #define ISTATUS_HOST 0x18c
> >> >> #define IMSI_ADDR 0x190
> >> >> #define ISTATUS_MSI 0x194
> >> >> +#define PMSG_SUPPORT_RX 0x3f0
> >> >> +#define PMSG_LTR_SUPPORT BIT(2)
> >> >>
> >> >> /* PCIe Master table init defines */
> >> >> #define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
> >> >> @@ -85,6 +97,8 @@
> >> >> #define PCIE_TX_RX_INTERFACE 0x00000000u
> >> >> #define PCIE_CONFIG_INTERFACE 0x00000001u
> >> >>
> >> >> +#define CONFIG_SPACE_ADDR 0x1000u
> >> >> +
> >> >> #define ATR_ENTRY_SIZE 32
> >> >>
> >> >> #define EVENT_A_ATR_EVT_POST_ERR 0
> >> >> @@ -134,6 +148,11 @@ struct plda_event_ops {
> >> >> u32 (*get_events)(struct plda_pcie_rp *pcie);
> >> >> };
> >> >>
> >> >> +struct plda_pcie_host_ops {
> >> >> + int (*host_init)(struct plda_pcie_rp *pcie);
> >> >> + void (*host_deinit)(struct plda_pcie_rp *pcie);
> >> >> +};
> >> >> +
> >> >> struct plda_msi {
> >> >> struct mutex lock; /* Protect used bitmap */
> >> >> struct irq_domain *msi_domain;
> >> >> @@ -145,12 +164,19 @@ struct plda_msi {
> >> >>
> >> >> struct plda_pcie_rp {
> >> >> struct device *dev;
> >> >> + struct pci_host_bridge *bridge;
> >> >> struct irq_domain *intx_domain;
> >> >> struct irq_domain *event_domain;
> >> >> raw_spinlock_t lock;
> >> >> struct plda_msi msi;
> >> >> const struct plda_event_ops *event_ops;
> >> >> + const struct plda_pcie_host_ops *host_ops;
> >> >> + struct phy *phy;
> >> >> void __iomem *bridge_addr;
> >> >> + void __iomem *config_base;
> >> >> + int irq;
> >> >> + int msi_irq;
> >> >> + int intx_irq;
> >> >> int num_events;
> >> >> };
> >> >>
> >> >> @@ -163,6 +189,7 @@ struct plda_event {
> >> >> int msi_event;
> >> >> };
> >> >>
> >> >> +void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn, int where);
> >> >> int plda_init_interrupts(struct platform_device *pdev,
> >> >> struct plda_pcie_rp *port,
> >> >> const struct plda_event *event);
> >> >> @@ -171,4 +198,66 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> >> >> size_t size);
> >> >> int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> >> >> struct plda_pcie_rp *port);
> >> >> -#endif
> >> >> +int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
> >> >> +void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
> >> >> +
> >> >> +static inline void plda_set_default_msi(struct plda_msi *msi)
> >> >> +{
> >> >> + msi->vector_phy = IMSI_ADDR;
> >> >> + msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + u32 value;
> >> >> +
> >> >> + value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> >> >> + value |= RP_ENABLE;
> >> >> + writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + u32 value;
> >> >> +
> >> >> + value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> >> + value &= 0xff;
> >> >> + value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> >> >
> >> > This looks suspicious. You're clearing the lower 8 bits, but setting
> >> > bits 16 and up. Also the parentheses are not strictly necessary.
> >> >
> >> I will add comments to this.
> >> >> + writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + u32 value;
> >> >> +
> >> >> + value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> >> >> + value |= PREF_MEM_WIN_64_SUPPORT;
> >> >> + writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + u32 value;
> >> >> +
> >> >> + value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> >> >> + value &= ~PMSG_LTR_SUPPORT;
> >> >> + writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + u32 value;
> >> >> +
> >> >> + value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> >> >> + value |= PHY_FUNCTION_DIS;
> >> >> + writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> >> >> +}
> >> >> +
> >> >> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> >> >> +{
> >> >> + void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR;
> >> >> +
> >> >> + writel_relaxed(val & 0xffffffff, addr + PCI_BASE_ADDRESS_0);
> >> >> + writel_relaxed(val >> 32, addr + PCI_BASE_ADDRESS_1);
> >> >
> >> > Consider using lower_32_bits(val) and upper_32_bits(val) here.
> >> >
> >> >> +}
> >> >> +#endif /* _PCIE_PLDA_H */
> >> >> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> >> >> new file mode 100644
> >> >> index 000000000000..42099fef0d7d
> >> >> --- /dev/null
> >> >> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> >> >> @@ -0,0 +1,461 @@
> >> >> +// SPDX-License-Identifier: GPL-2.0+
> >> >> +/*
> >> >> + * PCIe host controller driver for StarFive JH7110 Soc.
> >> >> + *
> >> >> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> >> >> + */
> >> >> +
> >> >> +#include <linux/bitfield.h>
> >> >> +#include <linux/clk.h>
> >> >> +#include <linux/delay.h>
> >> >> +#include <linux/gpio/consumer.h>
> >> >> +#include <linux/interrupt.h>
> >> >> +#include <linux/kernel.h>
> >> >> +#include <linux/mfd/syscon.h>
> >> >> +#include <linux/module.h>
> >> >> +#include <linux/of_address.h>
> >> >> +#include <linux/of_irq.h>
> >> >> +#include <linux/of_pci.h>
> >> >> +#include <linux/pci.h>
> >> >> +#include <linux/platform_device.h>
> >> >> +#include <linux/pm_runtime.h>
> >> >> +#include <linux/regmap.h>
> >> >> +#include <linux/reset.h>
> >> >> +#include "../../pci.h"
> >> >> +
> >> >> +#include "pcie-plda.h"
> >> >> +
> >> >> +#define PCIE_FUNC_NUM 4
> >> >> +
> >> >> +/* system control */
> >> >> +#define STG_SYSCON_PCIE0_BASE 0x48
> >> >> +#define STG_SYSCON_PCIE1_BASE 0x1f8
> >> >> +
> >> >> +#define STG_SYSCON_ARFUNC_OFFSET 0x78
> >> >> +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK GENMASK(22, 8)
> >> >> +#define STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(x) FIELD_PREP(GENMASK(20, 17), x)
> >> >> +#define STG_SYSCON_AWFUNC_OFFSET 0x7c
> >> >> +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK GENMASK(14, 0)
> >> >> +#define STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(x) FIELD_PREP(GENMASK(12, 9), x)
> >> >> +#define STG_SYSCON_CLKREQ BIT(22)
> >> >> +#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
> >> >> +#define STG_SYSCON_RP_NEP_OFFSET 0xe8
> >> >> +#define STG_SYSCON_K_RP_NEP BIT(8)
> >> >> +#define STG_SYSCON_LNKSTA_OFFSET 0x170
> >> >> +#define DATA_LINK_ACTIVE BIT(5)
> >> >> +
> >> >> +/* Parameters for the waiting for link up routine */
> >> >> +#define LINK_WAIT_MAX_RETRIES 10
> >> >> +#define LINK_WAIT_USLEEP_MIN 90000
> >> >> +#define LINK_WAIT_USLEEP_MAX 100000
> >> >> +
> >> >> +struct starfive_jh7110_pcie {
> >> >> + struct plda_pcie_rp plda;
> >> >> + struct reset_control *resets;
> >> >> + struct clk_bulk_data *clks;
> >> >> + struct regmap *reg_syscon;
> >> >> + struct gpio_desc *power_gpio;
> >> >> + struct gpio_desc *reset_gpio;
> >> >> +
> >> >> + u32 stg_arfun;
> >> >> + u32 stg_awfun;
> >> >> + u32 stg_rp_nep;
> >> >> + u32 stg_lnksta;
> >> >> +
> >> >> + int num_clks;
> >> >> +};
> >> >> +
> >> >> +/*
> >> >> + * The BAR0/1 of bridge should be hidden during enumeration to
> >> >> + * avoid the sizing and resource allocation by PCIe core.
> >> >> + */
> >> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
> >> >> + int offset)
> >> >> +{
> >> >> + if (pci_is_root_bus(bus) && !devfn &&
> >> >> + (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> >> >> + return true;
> >> >> +
> >> >> + return false;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> >> >> + int where, int size, u32 value)
> >> >> +{
> >> >> + if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> >> + return PCIBIOS_BAD_REGISTER_NUMBER;
> >> >> +
> >> >> + return pci_generic_config_write(bus, devfn, where, size, value);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> >> >> + int where, int size, u32 *value)
> >> >> +{
> >> >> + if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> >> >> + return PCIBIOS_BAD_REGISTER_NUMBER;
> >> >> +
> >> >> + return pci_generic_config_read(bus, devfn, where, size, value);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie, struct device *dev)
> >> >> +{
> >> >> + int domain_nr, stg_pcie_base;
> >> >> +
> >> >> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> >> >> + if (pcie->num_clks < 0)
> >> >> + return dev_err_probe(dev, -ENODEV,
> >> >> + "failed to get pcie clocks\n");
> >> >> +
> >> >> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
> >> >> + if (IS_ERR(pcie->resets))
> >> >> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
> >> >> + "failed to get pcie resets");
> >> >> +
> >> >> + pcie->reg_syscon =
> >> >> + syscon_regmap_lookup_by_phandle(dev->of_node,
> >> >> + "starfive,stg-syscon");
> >> >> +
> >> >> + if (IS_ERR(pcie->reg_syscon))
> >> >> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> >> >> + "failed to parse starfive,stg-syscon\n");
> >> >> +
> >> >> + domain_nr = of_get_pci_domain_nr(dev->of_node);
> >> >> +
> >> >> + if (domain_nr < 0 || domain_nr > 1)
> >> >> + return dev_err_probe(dev, -ENODEV,
> >> >> + "failed to get valid pcie id\n");
> >> >> +
> >> >> + if (domain_nr == 0)
> >> >> + stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> >> >> + else
> >> >> + stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> >> >
> >> > It seems you only need the domain_nr for the determining this offset into the
> >> > stg_syscon. Since this is already specific to the JH7110 SoC, wouldn't it be
> >> > safer to match on the 0x2b000000/0x2c000000 or 0x940000000/0x9c0000000
> >> > address of the peripheral instead?
> >> >
> >> Maybe this codes not just bind to JH7110 SoC.
> >
> > Right, but in that case the STG_SYSCON_PCIE{0,1}_BASE offsets will also be
> > different, so you'd need to get them from device tree match data anyway, and
> > then you might as well have an { address, offset } table.
> > Previous I discuss this with Conor，The match data is not added now.
> The match data will be added While adding different device tree compatible.
> Now just one compatible.
Exactly. So for now there should be now problem matching on the
peripheral address.
> >> >> +
> >> >> + pcie->stg_arfun = stg_pcie_base + STG_SYSCON_ARFUNC_OFFSET;
> >> >> + pcie->stg_awfun = stg_pcie_base + STG_SYSCON_AWFUNC_OFFSET;
> >> >> + pcie->stg_rp_nep = stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET;
> >> >> + pcie->stg_lnksta = stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET;
> >> >
> >> > These offsets are all the same for both pcie0 and pcie1 so why do you need a
> >> > variable for each? Eg. why not just
> >> >
> >> > if (domain_nr == 0)
> >> > pcie->stg_base = STG_SYSCON_PCIE0_BASE;
> >> > else
> >> > pcie->stg_base = STG_SYSCON_PCIE1_BASE;
> >> >
> >> > ..and then add add those static offsets where needed?
> >> >
> >> OK. I will try to modify this.
> >> >> +
> >> >> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
> >> >> + if (IS_ERR(pcie->reset_gpio)) {
> >> >> + dev_warn(dev, "failed to get perst-gpio\n");
> >> >
> >> > Why is this a warn when you actually error out? I think you mean
> >> >
> >> > return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio, "failed to get
> >> > reset GPIO\n");
> >> >
> >> >> + return -EINVAL;
> >> >> + }
> >> >> +
> >> >> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> >> >> + if (IS_ERR(pcie->power_gpio)) {
> >> >> + dev_warn(dev, "failed to get power-gpio\n");
> >> >> + return -EINVAL;
> >> >
> >> > return dev_err_probe(dev, PTR_ERR(pcie->power_gpio), "failed to get
> >> > power GPIO\n");
> >> >
> >> >> + }
> >> >> +
> >> >> + return 0;
> >> >> +}
> >> >> +
> >> >> +static struct pci_ops starfive_pcie_ops = {
> >> >> + .map_bus = plda_pcie_map_bus,
> >> >> + .read = starfive_pcie_config_read,
> >> >> + .write = starfive_pcie_config_write,
> >> >> +};
> >> >> +
> >> >> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> + int ret;
> >> >> + struct device *dev = pcie->plda.dev;
> >> >
> >> > Again, please order initialized variables first.
> >> >
> >> >> +
> >> >> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> >> + if (ret) {
> >> >> + dev_err(dev, "failed to enable clocks\n");
> >> >> + return ret;
> >> >
> >> > return dev_err_probe(dev, ret, "failed to enable clocks\n");
> >> >
> >> >> + }
> >> >> +
> >> >> + ret = reset_control_deassert(pcie->resets);
> >> >> + if (ret) {
> >> >> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> + dev_err(dev, "failed to resets\n");
> >> >
> >> > I think you mean
> >> > return dev_err_probe(dev, ret, "failed to deassert resets\n");
> >> >
> >> >> + }
> >> >> +
> >> >> + return ret;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> + reset_control_assert(pcie->resets);
> >> >> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> +}
> >> >> +
> >> >> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + struct starfive_jh7110_pcie *pcie =
> >> >> + container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> + struct device *dev = pcie->plda.dev;
> >> >
> >> > This is only used once below, so just use pcie->plda.dev directly there.
> >> >
> >> OK, thanks
> >> >> + int ret;
> >> >> + u32 stg_reg_val;
> >> >> +
> >> >> + ret = regmap_read(pcie->reg_syscon, pcie->stg_lnksta, &stg_reg_val);
> >> >> + if (ret) {
> >> >> + dev_err(dev, "failed to read link status\n");
> >> >> + return false;
> >> >> + }
> >> >> +
> >> >> + if (stg_reg_val & DATA_LINK_ACTIVE)
> >> >> + return true;
> >> >> +
> >> >> + return false;
> >> >
> >> > These last 4 lines is just "return stg_reg_val & DATA_LINK_ACTIVE;" right?
> >> >
> >> OK
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> >> >> +{
> >> >> + struct device *dev = pcie->plda.dev;
> >> >
> >> > Only used once, just inline.
> >> >
> >> >> + int retries;
> >> >> +
> >> >> + /* Check if the link is up or not */
> >> >> + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> >> >> + if (starfive_pcie_link_up(&pcie->plda)) {
> >> >> + dev_info(dev, "port link up\n");
> >> >> + return 0;
> >> >> + }
> >> >> + usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> >> >> + }
> >> >> +
> >> >> + return -ETIMEDOUT;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_enable_phy(struct device *dev, struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> + int ret;
> >> >> +
> >> >> + if (!pcie->phy)
> >> >> + return 0;
> >> >> +
> >> >> + ret = phy_init(pcie->phy);
> >> >> + if (ret)
> >> >> + return dev_err_probe(dev, ret,
> >> >> + "failed to initialize pcie phy\n");
> >> >> +
> >> >> + ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> >> >> + if (ret) {
> >> >> + dev_err(dev, "failed to set pcie mode\n");
> >> >> + goto err_phy_on;
> >> >> + }
> >> >> +
> >> >> + ret = phy_power_on(pcie->phy);
> >> >> + if (ret) {
> >> >> + dev_err(dev, "failed to power on pcie phy\n");
> >> >> + goto err_phy_on;
> >> >> + }
> >> >> +
> >> >> + return 0;
> >> >> +
> >> >> +err_phy_on:
> >> >> + phy_exit(pcie->phy);
> >> >> + return ret;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_disable_phy(struct plda_pcie_rp *pcie)
> >> >> +{
> >> >> + phy_power_off(pcie->phy);
> >> >> + phy_exit(pcie->phy);
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + struct starfive_jh7110_pcie *pcie =
> >> >> + container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> +
> >> >> + starfive_pcie_clk_rst_deinit(pcie);
> >> >> + if (pcie->power_gpio)
> >> >> + gpiod_set_value_cansleep(pcie->power_gpio, 0);
> >> >> + starfive_pcie_disable_phy(plda);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> >> >> +{
> >> >> + int i;
> >> >> + struct starfive_jh7110_pcie *pcie =
> >> >> + container_of(plda, struct starfive_jh7110_pcie, plda);
> >> >> + struct device *dev = plda->dev;
> >> >> + int ret;
> >> >
> >> > Weird ordering again.
> >> >
> >> >> +
> >> >> + ret = starfive_pcie_enable_phy(dev, plda);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> +
> >> >> + regmap_update_bits(pcie->reg_syscon, pcie->stg_rp_nep,
> >> >> + STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> >> >> +
> >> >> + regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> + STG_SYSCON_CKREF_SRC_MASK,
> >> >> + FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> >> >> +
> >> >> + regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> + STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> >> >> +
> >> >> + ret = starfive_pcie_clk_rst_init(pcie);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> +
> >> >> + if (pcie->power_gpio)
> >> >> + gpiod_set_value_cansleep(pcie->power_gpio, 1);
> >> >> +
> >> >> + if (pcie->reset_gpio)
> >> >> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> >> >> +
> >> >> + /* Disable physical functions except #0 */
> >> >> + for (i = 1; i < PCIE_FUNC_NUM; i++) {
> >> >> + regmap_update_bits(pcie->reg_syscon,
> >> >> + pcie->stg_arfun,
> >> >> + STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
> >> >> + STG_SYSCON_AXI4_SLVL_PHY_ARFUNC(i));
> >> >> +
> >> >> + regmap_update_bits(pcie->reg_syscon,
> >> >> + pcie->stg_awfun,
> >> >> + STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
> >> >> + STG_SYSCON_AXI4_SLVL_PHY_AWFUNC(i));
> >> >> +
> >> >> + plda_pcie_disable_func(plda);
> >> >> + }
> >> >> +
> >> >> + regmap_update_bits(pcie->reg_syscon, pcie->stg_arfun,
> >> >> + STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, 0);
> >> >> + regmap_update_bits(pcie->reg_syscon, pcie->stg_awfun,
> >> >> + STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, 0);
> >> >> +
> >> >> + plda_pcie_enable_root_port(plda);
> >> >> + plda_pcie_write_rc_bar(plda, 0);
> >> >> +
> >> >> + /* PCIe PCI Standard Configuration Identification Settings. */
> >> >> + plda_pcie_set_standard_class(plda);
> >> >> +
> >> >> + /*
> >> >> + * The LTR message forwarding of PCIe Message Reception was set by core
> >> >> + * as default, but the forward id & addr are also need to be reset.
> >> >> + * If we do not disable LTR message forwarding here, or set a legal
> >> >> + * forwarding address, the kernel will get stuck after this driver probe.
> >> >> + * To workaround, disable the LTR message forwarding support on
> >> >> + * PCIe Message Reception.
> >> >> + */
> >> >> + plda_pcie_disable_ltr(plda);
> >> >> +
> >> >> + /* Prefetchable memory window 64-bit addressing support */
> >> >> + plda_pcie_set_pref_win_64bit(plda);
> >> >> +
> >> >> + /* Ensure that PERST has been asserted for at least 100 ms,
> >> >> + * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> >> >> + */
> >> >> + msleep(100);
> >> >> + if (pcie->reset_gpio)
> >> >> + gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> >> >> +
> >> >> + /* As the requirement in PCIe base spec r6.0, system (<=5GT/s) must
> >> >> + * wait a minimum of 100 ms following exit from a conventional reset
> >> >> + * before sending a configuration request to the device.
> >> >> + */
> >> >> + msleep(100);
> >> >> +
> >> >> + if (starfive_pcie_host_wait_for_link(pcie))
> >> >> + dev_info(dev, "port link down\n");
> >> >> +
> >> >> + return ret;
> >> >> +}
> >> >> +
> >> >> +static const struct plda_pcie_host_ops sf_host_ops = {
> >> >> + .host_init = starfive_pcie_host_init,
> >> >> + .host_deinit = starfive_pcie_host_deinit,
> >> >> +};
> >> >> +
> >> >> +static int starfive_pcie_probe(struct platform_device *pdev)
> >> >> +{
> >> >> + struct device *dev = &pdev->dev;
> >> >> + struct starfive_jh7110_pcie *pcie;
> >> >> + struct plda_pcie_rp *plda;
> >> >> + int ret;
> >> >> +
> >> >> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> >> >> + if (!pcie)
> >> >> + return -ENOMEM;
> >> >> +
> >> >> + plda = &pcie->plda;
> >> >> + plda->dev = dev;
> >> >> +
> >> >> + ret = starfive_pcie_parse_dt(pcie, dev);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> +
> >> >> + plda->host_ops = &sf_host_ops;
> >> >> + plda->num_events = NUM_PLDA_EVENTS;
> >> >> + ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> +
> >> >> + pm_runtime_enable(&pdev->dev);
> >> >> + pm_runtime_get_sync(&pdev->dev);
> >> >> + platform_set_drvdata(pdev, pcie);
> >> >> +
> >> >> + return 0;
> >> >> +}
> >> >> +
> >> >> +static void starfive_pcie_remove(struct platform_device *pdev)
> >> >> +{
> >> >> + struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> >> >> +
> >> >> + plda_pcie_host_deinit(&pcie->plda);
> >> >> + platform_set_drvdata(pdev, NULL);
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_suspend_noirq(struct device *dev)
> >> >> +{
> >> >> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> >> +
> >> >> + if (!pcie)
> >> >> + return 0;
> >> >> +
> >> >> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> >> >> + starfive_pcie_disable_phy(&pcie->plda);
> >> >> +
> >> >> + return 0;
> >> >> +}
> >> >> +
> >> >> +static int starfive_pcie_resume_noirq(struct device *dev)
> >> >> +{
> >> >> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> >> >> + int ret;
> >> >> +
> >> >> + ret = starfive_pcie_enable_phy(dev, &pcie->plda);
> >> >> + if (ret)
> >> >> + return ret;
> >> >> +
> >> >> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> >> >> + if (ret) {
> >> >> + dev_err(dev, "failed to enable clocks\n");
> >> >> + starfive_pcie_disable_phy(&pcie->plda);
> >> >> + return ret;
> >> >> + }
> >> >> +
> >> >> + return ret;
> >> >> +}
> >> >> +
> >> >> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> >> >> + NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> >> >> + starfive_pcie_resume_noirq)
> >> >> +};
> >> >> +
> >> >> +static const struct of_device_id starfive_pcie_of_match[] = {
> >> >> + { .compatible = "starfive,jh7110-pcie"},
> >> >
> >> > Missing space before }
> >> >
> >> >> + { /* sentinel */ }
> >> >> +};
> >> >> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> >> >> +
> >> >> +static struct platform_driver starfive_pcie_driver = {
> >> >> + .driver = {
> >> >> + .name = "pcie-starfive",
> >> >> + .of_match_table = of_match_ptr(starfive_pcie_of_match),
> >> >> +#ifdef CONFIG_PM_SLEEP
> >> >> + .pm = &starfive_pcie_pm_ops,
> >> >> +#endif
> >> >
> >> > This can be just .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> >> >
> >> OK
> >> >> + },
> >> >> + .probe = starfive_pcie_probe,
> >> >> + .remove_new = starfive_pcie_remove,
> >> >> +};
> >> >> +module_platform_driver(starfive_pcie_driver);
> >> >> +
> >> >> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> >> >> +MODULE_LICENSE("GPL v2");
> >> >> --
> >> >> 2.17.1
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
