On Tue, Aug 29, 2023 at 02:35:36PM -0700, Patel, Nirmal wrote: > On 8/29/2023 11:00 AM, Bjorn Helgaas wrote: > > On Tue, Aug 29, 2023 at 01:10:22AM -0400, Nirmal Patel wrote: > >> Currently during Host boot up, VMD UEFI driver loads and configures > >> all the VMD endpoints devices and devices behind VMD. Then during > >> VMD rootport creation, VMD driver honors ACPI settings for Hotplug, > >> AER, DPC, PM and enables these features based on BIOS settings. > >> > >> During the Guest boot up, ACPI settings along with VMD UEFI driver are > >> not present in Guest BIOS which results in assigning default values to > >> Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD > >> rootports in the Guest OS. > >> > >> VMD driver in Guest should be able to see the same settings as seen > >> by Host VMD driver. Because of the missing implementation of VMD UEFI > >> driver in Guest BIOS, the Hotplug is disabled on VMD rootport in > >> Guest OS. Hot inserted drives don't show up and hot removed drives > >> do not disappear even if VMD supports Hotplug in Guest. This > >> behavior is observed in various combinations of guest OSes i.e. RHEL, > >> SLES and hypervisors i.e. KVM and ESXI. > >> > >> This change will make the VMD Host and Guest Driver to keep the settings > >> implemented by the UEFI VMD DXE driver and thus honoring the user > >> selections for hotplug in the BIOS. > > These settings are negotiated between the OS and the BIOS. The guest > > runs a different BIOS than the host, so why should the guest setting > > be related to the host setting? > > > > I'm not a virtualization whiz, and I don't understand all of what's > > going on here, so please correct me when I go wrong: > > > > IIUC you need to change the guest behavior. The guest currently sees > > vmd_bridge->native_pcie_hotplug as FALSE, and you need it to be TRUE? > > Correct. Why ? Can you explain to us please what the bug is ? It is clear that "hotplug is broken in the guest" is not enough to fix this sensibly. > > Currently this is copied from the guest's > > root_bridge->native_pcie_hotplug, so that must also be FALSE. > > > > I guess the guest sees a fabricated host bridge, which would start > > with native_pcie_hotplug as TRUE (from pci_init_host_bridge()), and > > then it must be set to FALSE because the guest _OSC didn't grant > > ownership to the OS? (The guest dmesg should show this, right?) > > This is my understanding too. I don't know much in detail about Guest > expectation. What clears native_pcie_hotplug in the guest (if it does not have ACPI firmware and therefore no _OSC negotiation) ? > > In the guest, vmd_enable_domain() allocates a host bridge via > > pci_create_root_bus(), and that would again start with > > native_pcie_hotplug as TRUE. It's not an ACPI host bridge, so I don't > > think we do _OSC negotiation for it. After this patch removes the > > copy from the fabricated host bridge, it would be left as TRUE. > > VMD was not dependent on _OSC settings and is not ACPI Host bridge. It > became _OSC dependent after the patch 04b12ef163d1. > https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0e > > This patch was added as a quick fix for AER flooding but it could > have been avoided by using rate limit for AER. > > I don't know all the history of VMD driver but does it have to be > dependent on root_bridge flags from _OSC? Is reverting 04b12ef163d1 > a better idea than not allowing just hotplug flags to be copied from > root_bridge? No, a better idea is to understand what the bug is and fix it for good. So we are back to the drawing board to define how the host bridge driver works in the host and in the guest to understand how hardware is configured and what do we expect from it. Thanks, Lorenzo > > Thanks. > > > > > If this is on track, it seems like if we want the guest to own PCIe > > hotplug, the guest BIOS _OSC for the fabricated host bridge should > > grant ownership of it. > > I will try to check this option. > > > > >> Signed-off-by: Nirmal Patel <nirmal.patel@xxxxxxxxxxxxxxx> > >> --- > >> v3->v4: Rewrite the commit log. > >> v2->v3: Update the commit log. > >> v1->v2: Update the commit log. > >> --- > >> drivers/pci/controller/vmd.c | 2 -- > >> 1 file changed, 2 deletions(-) > >> > >> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > >> index 769eedeb8802..52c2461b4761 100644 > >> --- a/drivers/pci/controller/vmd.c > >> +++ b/drivers/pci/controller/vmd.c > >> @@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd) > >> static void vmd_copy_host_bridge_flags(struct pci_host_bridge *root_bridge, > >> struct pci_host_bridge *vmd_bridge) > >> { > >> - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; > >> - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; > >> vmd_bridge->native_aer = root_bridge->native_aer; > >> vmd_bridge->native_pme = root_bridge->native_pme; > >> vmd_bridge->native_ltr = root_bridge->native_ltr; > >> -- > >> 2.31.1 > >> >
