The primary,secondary and sub-ordinate bus number registers are updated by
Linux PCI core, so remove code which updates repective fields of type 1
header 18th offset of Root Port configuration space.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxx>
---
changes in v2:
- Code increasing ECAM Size value is added into a seperate patch.
- Modified commit messages.
changes in v1:
- Modified commit messages.
---
drivers/pci/controller/pcie-xilinx-nwl.c | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 176686b..a73554e 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -165,8 +165,6 @@ struct nwl_pcie {
u32 ecam_size;
int irq_intx;
int irq_misc;
- u32 ecam_value;
- u8 last_busno;
struct nwl_msi msi;
struct irq_domain *legacy_irq_domain;
struct clk *clk;
@@ -625,7 +623,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
{
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
- u32 breg_val, ecam_val, first_busno = 0;
+ u32 breg_val, ecam_val;
int err;
breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
@@ -675,7 +673,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
- (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
+ (NWL_ECAM_VALUE_DEFAULT << E_ECAM_SIZE_SHIFT),
E_ECAM_CONTROL);
nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_ecam_base),
@@ -683,15 +681,6 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_ecam_base),
E_ECAM_BASE_HI);
- /* Get bus range */
- ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
- pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
- /* Write primary, secondary and subordinate bus numbers */
- ecam_val = first_busno;
- ecam_val |= (first_busno + 1) << 8;
- ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
- writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
-
if (nwl_pcie_link_up(pcie))
dev_info(dev, "Link is UP\n");
else
@@ -792,7 +781,6 @@ static int nwl_pcie_probe(struct platform_device *pdev)
pcie = pci_host_bridge_priv(bridge);
pcie->dev = dev;
- pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
err = nwl_pcie_parse_dt(pcie, pdev);
if (err) {
--
1.8.3.1
