On Wed, Jul 19, 2023 at 12:50:14PM +0530, Krishna chaitanya chundru wrote: > Add basic support for managing "pcie-mem" interconnect path by setting > a low constraint before enabling clocks and updating it after the link > is up based on link speed and width the device got enumerated. > Krzysztof, can this series be merged for 6.6? Bjorn A will pick the dts patches. - Mani > changes from v9: > - addressed the comments by mani. > changes from v8: > - Added cpu to pcie path in dtsi and in dtsi binding. > changes from v7: > - setting icc bw to '0' in disable resources as suggested by mani. > changes from v6: > - addressed the comments as suggested by mani. > changes from v5: > - addressed the comments by mani. > changes from v4: > - rebased with linux-next. > - Added comments as suggested by mani. > - removed the arm: dts: qcom: sdx55: Add interconnect path > as that patch is already applied. > changes from v3: > - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed > errors. > - Added macros in the qcom ep driver patch as suggested by Dmitry > changes from v2: > - changed the logic for getting speed and width as suggested > by bjorn. > - fixed compilation errors. > > > Krishna chaitanya chundru (4): > PCI: qcom-ep: Add ICC bandwidth voting support > arm: dts: qcom: sdx65: Add PCIe EP interconnect path > arm: dts: qcom: sdx55: Add CPU PCIe EP interconnect path > dt-bindings: PCI: qcom: ep: Add interconnects path > > .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 15 +++++ > arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 5 +- > arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 4 ++ > drivers/pci/controller/dwc/pcie-qcom-ep.c | 71 ++++++++++++++++++++++ > 4 files changed, 93 insertions(+), 2 deletions(-) > > -- > 2.7.4 > -- மணிவண்ணன் சதாசிவம்
