On Fri, Jun 16, 2023 at 04:34:27PM -0700, Smita Koralahalli wrote: > On 6/16/2023 11:24 AM, Lukas Wunner wrote: > > On Mon, May 22, 2023 at 03:23:31PM -0700, Smita Koralahalli wrote: > > > On 5/11/2023 4:19 AM, Lukas Wunner wrote: > > > > On Tue, Apr 18, 2023 at 09:05:26PM +0000, Smita Koralahalli wrote: > > > Some couple of ways we think could be: > > > [1] Check if these bits are enabled by Platform at boot time, clear them > > > only it is set during hotplug flow. > > > [2] Clear them unconditionally as I did.. > > > [3] Enable 10-bits tags in Linux when a device is probed just like how > > > we do for ARI.. > > > > > > Similarly call pci_enable_atomic_ops_to_root() during a hot add.. > > > > Personally I'm fine with option [2]. If you or Bjorn prefer option [3], > > I'm fine with that as well. > > Looking forward for Bjorn comments! You may want to consider first doing [2], i.e. clear the DevCtl2 bits on hot removal, and then in a separate step do [3], i.e. add support for enabling 10 bit tags and atomic ops in the kernel. Having that would certainly be useful, but it's more complex than just clearing the DevCtl2 bits on unplug. So you may want to do the latter as a stop-gap. Thanks, Lukas
