[PATCH v2 2/8] PCI: qcom: Disable write access to read only registers for IP v2.9.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.

Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 01795ee7ce45..391a45d1e70a 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1136,6 +1136,7 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(0, pcie->parf + PARF_Q2A_FLUSH);
 
 	dw_pcie_dbi_ro_wr_en(pci);
+
 	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
 
 	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
@@ -1145,6 +1146,8 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
 			PCI_EXP_DEVCTL2);
 
+	dw_pcie_dbi_ro_wr_dis(pci);
+
 	for (i = 0; i < 256; i++)
 		writel(0, pcie->parf + PARF_BDF_TO_SID_TABLE_N + (4 * i));
 
-- 
2.25.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux