On Tue, May 9, 2023 at 3:47 AM Cyril Brulebois <kibi@xxxxxxxxxx> wrote: > > Hi Jim, > > Jim Quinlan <jim2101024@xxxxxxxxx> (2023-05-08): > > v5 -- Remove DT property "brcm,completion-timeout-us" from > > "DT bindings" commit. Although this error may be reported > > as a completion timeout, its cause was traced to an > > internal bus timeout which may occur even when there is > > no PCIe access being processed. We set a timeout of four > > seconds only if we are operating in "L1SS CLKREQ#" mode. > > -- Correct CEM 2.0 reference provided by HW engineer, > > s/3.2.5.2.5/3.2.5.2.2/ (Bjorn) > > -- Add newline to dev_info() string (Stefan) > > -- Change variable rval to unsigned (Stefan) > > -- s/implementaion/implementation/ (Bjorn) > > -- s/superpowersave/powersupersave/ (Bjorn) > > -- Slightly modify message on "PERST#" commit. > > -- Rebase to torvalds master > > Same results as with v4: looks good to me! > > Using an official CM4 IO Board, I've successfully tested the same 9 > setups as before, combining each: > - CM4 Lite Rev 1.0 > - CM4 8/32 Rev 1.0 > - CM4 4/32 Rev 1.1 > > with each off-the-shelf PCIe/USB adapter at my disposal: > - SupaHub PCE6U1C-R02, VER 006 > - SupaHub PCE6U1C-R02, VER 006S > - Waveshare based on VIA VL805/806 > > Each system boots successfully, exposes the Kingston memory stick > plugged onto the PCIe/USB adapter, and happily reads data from it. > > Note: I only tested each CM4 with the upgraded EEPROM (2023-01-11), > and without tweaking the DTB (i.e. without adding brcm,enable-l1ss). > > > Tested-By: Cyril Brulebois <cyril@xxxxxxxxxxx> Thanks a lot for doing this Cyril! > > > Cheers, > -- > Cyril Brulebois (kibi@xxxxxxxxxx) <https://debamax.com/> > D-I release manager -- Release team member -- Freelance Consultant
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
