Re: [PATCH v2 3/5] ACPI/PCI: Add AER bits #defines for PCIe to PCI/PCI-X Bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 12, 2023 at 05:49:55PM +0800, LeoLiuoc wrote:

> > > diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> > > index 57b8e2ffb1dd..37f3baa336d7 100644
> > > --- a/include/uapi/linux/pci_regs.h
> > > +++ b/include/uapi/linux/pci_regs.h
> > > @@ -799,6 +799,11 @@
> > >   #define  PCI_ERR_ROOT_AER_IRQ		0xf8000000 /* Advanced Error Interrupt Message Number */
> > >   #define PCI_ERR_ROOT_ERR_SRC	0x34	/* Error Source Identification */
> > > +/* PCIe advanced error reporting extended capabilities for PCIe to PCI/PCI-X Bridge */
> > > +#define PCI_ERR_UNCOR_MASK2		0x30	/* Secondary Uncorrectable Error Mask */
> > > +#define PCI_ERR_UNCOR_SEVER2	0x34	/* Secondary Uncorrectable Error Severit */
> > > +#define PCI_ERR_CAP2			0x38	/* Secondary Advanced Error Capabilities */
> > 
> > Please squash these right up next to the other PCI_ERR_* definitions
> > so it's obvious that they overlap PCI_ERR_ROOT_STATUS and
> > PCI_ERR_ROOT_ERR_SRC (which is fine since one device can't have both),
> > e.g.,
> > 
> >    #define PCI_ERR_ROOT_STATUS     0x30
> >    #define  PCI_ERR_ROOT_COR_RCV           0x00000001 /* ERR_COR Received */
> >    ...
> >    #define PCI_ERR_ROOT_ERR_SRC    0x34    /* Error Source Identification */
> >    #define PCI_ERR_UNCOR_MASK2     0x30    /* PCIe to PCI/PCI-X bridge */
> >    #define PCI_ERR_UNCOR_SEVER2    0x34    /* PCIe to PCI/PCI-X bridge */
> >    #define PCI_ERR_CAP2            0x38    /* PCIe to PCI/PCI-X bridge */
> 
> I don't seem to understand what you mean. PCI_ERR_UNCOR_MASK2,
> PCI_ERR_UNCOR_SEVER2, and PCI_ERR_CAP2 represent the control and handling of
> individual errors that occur on traditional PCI or PCI-x secondary bus
> interfaces, these registers are valid only for Bridge. Although
> PCI_ERR_ROOT_ERR_SRC and PCI_ERR_UNCOR_SEVER2 have the same value, they
> represent register definitions for different device types.

Right.  I just don't want the blank line in the middle because it
might be mistaken for items in a different capability.  All the other
AER capability registers are defined together in a block, with no
blank lines in the middle, so I think these new ones should be part of
that block.

Bjorn



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux