On Sat, 31 Dec 2022 08:40:41 +0100, Sergio Paracuellos wrote:
> Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
> to sleep a bit after call to mt7621_pcie_init_port() driver function to get
> into reliable boots for both warm and hard resets. The needed time for these
> devices to always detect the ports seems to be from 75 to 100 milliseconds.
> There is no datasheet or something similar to really understand why this
> extra time is needed in these devices but not in most of the boards which
> use mt7621 SoC. This issue has been reported by openWRT community and the
> complete discussion is in [0]. The selected time of 100 milliseconds has
> been also tested in these devices ending up in an always working platform.
> Hence, properly add the extra 100 milliseconds msleep() function call to make
> also these devices work.
>
> [...]
Applied to pci/controller/mt7621, thanks!
[1/1] PCI: mt7621: Sleep a bit after power on the PCIs phy ports
https://git.kernel.org/pci/pci/c/0cb2a8f3456f
Thanks,
Lorenzo
