Hi Lorenzo, Thanks for your comments. On Thu, Feb 2, 2023 at 5:27 PM Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx> wrote: > > On Mon, Jan 23, 2023 at 09:55:20AM +0100, Sergio Paracuellos wrote: > > Hi! > > > > On Sat, Dec 31, 2022 at 8:40 AM Sergio Paracuellos > > <sergio.paracuellos@xxxxxxxxx> wrote: > > > > > > Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need > > > to sleep a bit after call to mt7621_pcie_init_port() driver function to get > > > into reliable boots for both warm and hard resets. The needed time for these > > > devices to always detect the ports seems to be from 75 to 100 milliseconds. > > > There is no datasheet or something similar to really understand why this > > > extra time is needed in these devices but not in most of the boards which > > > use mt7621 SoC. This issue has been reported by openWRT community and the > > > complete discussion is in [0]. The selected time of 100 milliseconds has > > > been also tested in these devices ending up in an always working platform. > > > Hence, properly add the extra 100 milliseconds msleep() function call to make > > > also these devices work. > > > > > > [0]: https://github.com/openwrt/openwrt/pull/11220 > > > > > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> > > > --- > > > Hi Bjorn / Lorenzo, > > > > > > As per Lorenzo comments in v1[0] here it is the patch with changes in commit > > > message and introducing a new definition for this needed extra delay time. > > > I wish you the best new year for you both. > > > > > > Changes in v2: > > > - Add a new define 'INIT_PORTS_DELAY_MS' avoiding to reuse 'PERST_DELAY_MS'. > > > - Rewrite commit message and add a link to openWRT discussion. > > > > > > Previous patch lore link: > > > [0]: https://lore.kernel.org/lkml/20221209071703.2891714-1-sergio.paracuellos@xxxxxxxxx/T/ > > > > > > Thanks, > > > Sergio Paracuellos > > > > > > drivers/pci/controller/pcie-mt7621.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c > > > index ee7aad09d627..63a5f4463a9f 100644 > > > --- a/drivers/pci/controller/pcie-mt7621.c > > > +++ b/drivers/pci/controller/pcie-mt7621.c > > > @@ -60,6 +60,7 @@ > > > #define PCIE_PORT_LINKUP BIT(0) > > > #define PCIE_PORT_CNT 3 > > > > > > +#define INIT_PORTS_DELAY_MS 100 > > > #define PERST_DELAY_MS 100 > > > > > > /** > > > @@ -369,6 +370,7 @@ static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie) > > > } > > > } > > > > > > + msleep(INIT_PORTS_DELAY_MS); > > > mt7621_pcie_reset_ep_deassert(pcie); > > > > > > tmp = NULL; > > > -- > > > 2.25.1 > > > > > > > Gentle ping on this patch :-). > > I was about to merge it - there are a couple of things that I don't > like. > > First one is the comment, "Sleep a bit" does not mean anything. I'd > rather say "delay port initialization" or something like that, be > precise please. How about: PCI: mt7621: delay phy ports initialization > > More importantly, this is a fix but it is not clear from the commit > log. Please report what's wrong in the commit log. The problem is that PCI ports are not detected properly without this delay for those devices so plugged cards on them do not work at all. I don't really know how to write the commit log clearer but I'll try adding this cards plugged not working stuff :-) We can add maybe also if you want: Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver") > > I will rework the commit log and merge it then (if you want to avoid > another version just post an updated log here and I will merge it). Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need to sleep a bit after calling the mt7621_pcie_init_port() driver function to get into reliable boots for both warm and hard resets. The needed time for these devices to always detect the ports seems to be from 75 to 100 milliseconds. Without ports properly detected no card plugged into the PCI's work at all. There is no datasheet or something similar to really understand why this extra time is needed in these devices but not in most of the boards which use mt7621 SoC. This issue has been reported by openWRT community and the complete discussion is in [0]. The selected time of 100 milliseconds has been also tested in these devices ending up in an always working platform. Hence, properly add the extra 100 milliseconds msleep() function call to make also these devices work. [0]: https://github.com/openwrt/openwrt/pull/11220 > > Thanks, > Lorenzo Thanks, Sergio Paracuellos
