Only Root Ports and Event Collectors use MSI for AER. PCIe Switch ports
or endpoints on the other hand only send messages (that get collected by
the former). For this reason do not require PCIe switch ports and
endpoints to use interrupt if they support AER.
This allows portdrv to attach to recent Intel PCIe switch ports that
don't declare MSI or legacy interrupts.
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
drivers/pci/pcie/portdrv_core.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 1ac7fec47d6f..1b1c386e50c4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -164,7 +164,7 @@ static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
*/
static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
{
- int ret, i;
+ int ret, i, type;
for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
irqs[i] = -1;
@@ -177,6 +177,19 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
goto legacy_irq;
+ /*
+ * Only root ports and event collectors use MSI for errors. Endpoints,
+ * switch ports send messages to them but don't use MSI for that (PCIe
+ * 5.0 sec 6.2.3.2).
+ */
+ type = pci_pcie_type(dev);
+ if ((mask & PCIE_PORT_SERVICE_AER) &&
+ type != PCI_EXP_TYPE_ROOT_PORT && type != PCI_EXP_TYPE_RC_EC)
+ mask &= ~PCIE_PORT_SERVICE_AER;
+
+ if (!mask)
+ return 0;
+
/* Try to use MSI-X or MSI if supported */
if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
return 0;
--
2.35.1
