Re: [PATCH v2 7/8] arm64: dts: qcom: sm8350: add PCIe devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 10, 2022 at 01:33:44PM +0300, Dmitry Baryshkov wrote:
> Add PCIe0 and PCIe1 (and corresponding PHY) devices found on SM8350
> platform. The PCIe0 is a 1-lane Gen3 host, PCIe1 is a 2-lane Gen3 host.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 246 ++++++++++++++++++++++++++-
>  1 file changed, 244 insertions(+), 2 deletions(-)

> @@ -1761,6 +1957,52 @@ tlmm: pinctrl@f100000 {
>  			gpio-ranges = <&tlmm 0 0 204>;
>  			wakeup-parent = <&pdc>;
>  
> +			pcie0_default_state: pcie0-default-state {
> +				perst-pins {
> +					pins = "gpio94";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				clkreq-pins {
> +					pins = "gpio95";
> +					function = "pcie0_clkreqn";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				wake-pins {
> +					pins = "gpio96";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};

The pinconfig should go in the board file.

Johan



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux