On 03/11/2022 04:59, Havalige, Thippeswamy wrote:
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> Sent: Wednesday, November 2, 2022 8:53 PM
>> To: Havalige, Thippeswamy <thippeswamy.havalige@xxxxxxx>; linux-
>> pci@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> devicetree@xxxxxxxxxxxxxxx
>> Cc: bhelgaas@xxxxxxxxxx; michals@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
>> Yeleswarapu, Nagaradhesh <nagaradhesh.yeleswarapu@xxxxxxx>;
>> Gogada, Bharat Kumar <bharat.kumar.gogada@xxxxxxx>
>> Subject: Re: [PATCH v2 2/2] dt-bindings: PCI: xilinx-nwl: Convert to YAML
>> schemas of Xilinx NWL PCIe Root Port Bridge
>>
>> On 01/11/2022 01:20, Thippeswamy Havalige wrote:
>>> Convert to YAML schemas for Xilinx NWL PCIe Root Port Bridge dt
>>> binding.
>>>
>>> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
>>> ---
>>> .../bindings/pci/xilinx-nwl-pcie.txt | 73 ----------
>>> .../bindings/pci/xlnx,nwl-pcie.yaml | 137 ++++++++++++++++++
>>> 2 files changed, 137 insertions(+), 73 deletions(-) delete mode
>>> 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>>> create mode 100644
>>> Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>>> b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>>> deleted file mode 100644
>>> index f56f8c58c5d9..000000000000
>>> --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>>> +++ /dev/null
>>> @@ -1,73 +0,0 @@
>>> -* Xilinx NWL PCIe Root Port Bridge DT description
>>> -
>>> -Required properties:
>>> -- compatible: Should contain "xlnx,nwl-pcie-2.11"
>>> -- #address-cells: Address representation for root ports, set to <3>
>>> -- #size-cells: Size representation for root ports, set to <2>
>>> -- #interrupt-cells: specifies the number of cells needed to encode an
>>> - interrupt source. The value must be 1.
>>> -- reg: Should contain Bridge, PCIe Controller registers location,
>>> - configuration space, and length
>>> -- reg-names: Must include the following entries:
>>> - "breg": bridge registers
>>> - "pcireg": PCIe controller registers
>>> - "cfg": configuration space region
>>> -- device_type: must be "pci"
>>> -- interrupts: Should contain NWL PCIe interrupt
>>> -- interrupt-names: Must include the following entries:
>>> - "msi1, msi0": interrupt asserted when an MSI is received
>>> - "intx": interrupt asserted when a legacy interrupt is received
>>> - "misc": interrupt asserted when miscellaneous interrupt is received
>>> -- interrupt-map-mask and interrupt-map: standard PCI properties to
>> define the
>>> - mapping of the PCI interface to interrupt numbers.
>>> -- ranges: ranges for the PCI memory regions (I/O space region is not
>>> - supported by hardware)
>>> - Please refer to the standard PCI bus binding document for a more
>>> - detailed explanation
>>> -- msi-controller: indicates that this is MSI controller node
>>> -- msi-parent: MSI parent of the root complex itself
>>> -- legacy-interrupt-controller: Interrupt controller device node for Legacy
>>> - interrupts
>>> - - interrupt-controller: identifies the node as an interrupt controller
>>> - - #interrupt-cells: should be set to 1
>>> - - #address-cells: specifies the number of cells needed to encode an
>>> - address. The value must be 0.
>>> -
>>> -Optional properties:
>>> -- dma-coherent: present if DMA operations are coherent
>>> -- clocks: Input clock specifier. Refer to common clock bindings
>>> -
>>> -Example:
>>> -++++++++
>>> -
>>> -nwl_pcie: pcie@fd0e0000 {
>>> - #address-cells = <3>;
>>> - #size-cells = <2>;
>>> - compatible = "xlnx,nwl-pcie-2.11";
>>> - #interrupt-cells = <1>;
>>> - msi-controller;
>>> - device_type = "pci";
>>> - interrupt-parent = <&gic>;
>>> - interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
>>> - interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
>>> - interrupt-map-mask = <0x0 0x0 0x0 0x7>;
>>> - interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
>>> - <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
>>> - <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
>>> - <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
>>> -
>>> - msi-parent = <&nwl_pcie>;
>>> - reg = <0x0 0xfd0e0000 0x0 0x1000>,
>>> - <0x0 0xfd480000 0x0 0x1000>,
>>> - <0x80 0x00000000 0x0 0x1000000>;
>>> - reg-names = "breg", "pcireg", "cfg";
>>> - ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
>> 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
>>> - 0x43000000 0x00000006 0x00000000 0x00000006
>> 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
>>> -
>>> - pcie_intc: legacy-interrupt-controller {
>>> - interrupt-controller;
>>> - #address-cells = <0>;
>>> - #interrupt-cells = <1>;
>>> - };
>>> -
>>> -};
>>> diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>>> b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>>> new file mode 100644
>>> index 000000000000..f6634be618a2
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>>> @@ -0,0 +1,137 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Xilinx NWL PCIe Root Port Bridge
>>> +
>>> +maintainers:
>>> + - Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
>>> +
>>> +allOf:
>>> + - $ref: /schemas/pci/pci-bus.yaml#
>>> + - $ref: /schemas/interrupt-controller/msi-controller.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: xlnx,nwl-pcie-2.11
>>> +
>>> + reg:
>>> + items:
>>> + - description: PCIe bridge registers location.
>>> + - description: PCIe Controller registers location.
>>> + - description: PCIe Configuration space region.
>>> +
>>> + reg-names:
>>> + items:
>>> + - const: breg
>>
>> const: bridge
>>
>>> + - const: pcireg
>>
>> const: pci
>
> These reg-names are used in driver and existing customers are using these reg-names.
> Please let me know why reg-names need to be changed ?
You're right, I missed that this is a conversion... It's fine.
>
>>> + - const: cfg
>>> +
>>> + interrupts:
>>> + items:
>>> + - description: msi0 interrupt asserted when an MSI is received
>>> + - description: msi1 interrupt asserted when an MSI is received
>>> + - description: interrupt asserted when a legacy interrupt is received
>>> + - description: unused interrupt(dummy)
>>> + - description: interrupt asserted when miscellaneous interrupt
>>> + is received
>>> +
>>> + interrupt-names:
>>> + maxItems: 5
>>
>> I didn't notice last time - what are the names? They need to be defined.
Best regards,
Krzysztof
