Re: [PATCH v2 1/2] dt-bindings: PCI: xilinx-pcie: Convert to YAML schemas of Xilinx AXI PCIe Root Port Bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 01, 2022 at 10:50:48AM +0530, Thippeswamy Havalige wrote:
> Convert to YAML dtschemas of Xilinx AXI PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
> ---
>  .../devicetree/bindings/pci/xilinx-pcie.txt   | 88 -------------------
>  .../bindings/pci/xlnx,axi-pcie-host.yaml      | 87 ++++++++++++++++++
>  2 files changed, 87 insertions(+), 88 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> deleted file mode 100644
> index fd57a81180a4..000000000000
> --- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -* Xilinx AXI PCIe Root Port Bridge DT description
> -
> -Required properties:
> -- #address-cells: Address representation for root ports, set to <3>
> -- #size-cells: Size representation for root ports, set to <2>
> -- #interrupt-cells: specifies the number of cells needed to encode an
> -	interrupt source. The value must be 1.
> -- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
> -- reg: Should contain AXI PCIe registers location and length
> -- device_type: must be "pci"
> -- interrupts: Should contain AXI PCIe interrupt
> -- interrupt-map-mask,
> -  interrupt-map: standard PCI properties to define the mapping of the
> -	PCI interface to interrupt numbers.
> -- ranges: ranges for the PCI memory regions (I/O space region is not
> -	supported by hardware)
> -	Please refer to the standard PCI bus binding document for a more
> -	detailed explanation
> -
> -Optional properties for Zynq/Microblaze:
> -- bus-range: PCI bus numbers covered
> -
> -Interrupt controller child node
> -+++++++++++++++++++++++++++++++
> -Required properties:
> -- interrupt-controller: identifies the node as an interrupt controller
> -- #address-cells: specifies the number of cells needed to encode an
> -	address. The value must be 0.
> -- #interrupt-cells: specifies the number of cells needed to encode an
> -	interrupt source. The value must be 1.
> -
> -NOTE:
> -The core provides a single interrupt for both INTx/MSI messages. So,
> -created a interrupt controller node to support 'interrupt-map' DT
> -functionality.  The driver will create an IRQ domain for this map, decode
> -the four INTx interrupts in ISR and route them to this domain.
> -
> -
> -Example:
> -++++++++
> -Zynq:
> -	pci_express: axi-pcie@50000000 {
> -		#address-cells = <3>;
> -		#size-cells = <2>;
> -		#interrupt-cells = <1>;
> -		compatible = "xlnx,axi-pcie-host-1.00.a";
> -		reg = < 0x50000000 0x1000000 >;
> -		device_type = "pci";
> -		interrupts = < 0 52 4 >;
> -		interrupt-map-mask = <0 0 0 7>;
> -		interrupt-map = <0 0 0 1 &pcie_intc 1>,
> -				<0 0 0 2 &pcie_intc 2>,
> -				<0 0 0 3 &pcie_intc 3>,
> -				<0 0 0 4 &pcie_intc 4>;
> -		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
> -
> -		pcie_intc: interrupt-controller {
> -			interrupt-controller;
> -			#address-cells = <0>;
> -			#interrupt-cells = <1>;
> -		};
> -	};
> -
> -
> -Microblaze:
> -	pci_express: axi-pcie@10000000 {
> -		#address-cells = <3>;
> -		#size-cells = <2>;
> -		#interrupt-cells = <1>;
> -		compatible = "xlnx,axi-pcie-host-1.00.a";
> -		reg = <0x10000000 0x4000000>;
> -		device_type = "pci";
> -		interrupt-parent = <&microblaze_0_intc>;
> -		interrupts = <1 2>;
> -		interrupt-map-mask = <0 0 0 7>;
> -		interrupt-map = <0 0 0 1 &pcie_intc 1>,
> -				<0 0 0 2 &pcie_intc 2>,
> -				<0 0 0 3 &pcie_intc 3>,
> -				<0 0 0 4 &pcie_intc 4>;
> -		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
> -
> -		pcie_intc: interrupt-controller {
> -			interrupt-controller;
> -			#address-cells = <0>;
> -			#interrupt-cells = <1>;
> -		};
> -
> -	};
> diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
> new file mode 100644
> index 000000000000..fc0761a7a2e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx AXI PCIe Root Port Bridge
> +
> +maintainers:
> +  - Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    const: xlnx,axi-pcie-host-1.00.a
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ranges:
> +    items:
> +      - description: |
> +          ranges for the PCI memory regions (I/O space region is not
> +          supported by hardware)
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-controller:
> +    description: identifies the node as an interrupt controller
> +    type: object

       additionalProperties: false

> +    properties:
> +      "interrupt-controller": true

Don't need quotes.

> +      "#address-cells":
> +        const: 0

blank line

> +      "#interrupt-cells":
> +        const: 1
> +
> +    required:
> +      - 'interrupt-controller'
> +      - '#address-cells'
> +      - '#interrupt-cells'
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - interrupts
> +  - interrupt-map
> +  - "#interrupt-cells"
> +  - interrupt-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    zynq:

Odd, but I guess a valid label because they can appear about anywhere or 
multiple labels in the same place.

Drop and adjust the indentation.

> +        pci_express: pcie@50000000 {

Drop unused labels.

> +            compatible = "xlnx,axi-pcie-host-1.00.a";
> +            reg = < 0x50000000 0x1000000 >;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            device_type = "pci";
> +            interrupts = < GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH >;
> +            interrupt-map-mask = <0 0 0 7>;
> +            interrupt-map = <0 0 0 1 &pcie_intc 1>,
> +                            <0 0 0 2 &pcie_intc 2>,
> +                            <0 0 0 3 &pcie_intc 3>,
> +                            <0 0 0 4 &pcie_intc 4>;
> +            ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
> +            pcie_intc: interrupt-controller {
> +                interrupt-controller;
> +                #address-cells = <0>;
> +                #interrupt-cells = <1>;
> +            };
> +        };
> -- 
> 2.25.1
> 
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux