On Mon, Jan 16, 2012 at 2:14 AM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
> Peter Henriksson,
> Can you try for-pci2 branch on your setup with Xonar DX?
>
Attaching dmesg output with the for-pci2 branch. The Xonar DX appears
to be working.
Regards,
Peter
Initializing cgroup subsys cpu
Linux version 3.2.0-rc5+ (root@localhost) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.0, pie-0.4.6) ) #1 SMP PREEMPT Mon Jan 16 20:18:18 CET 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff40000 (usable)
BIOS-e820: 00000000cff40000 - 00000000cff4e000 (ACPI data)
BIOS-e820: 00000000cff4e000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer P5E64 WS EVOLUTION/P5E64 WS EVOLUTION, BIOS 0802 12/10/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1bfb000-1c00000
ACPI: RSDP 000faff0 00024 (v02 ACPIAM)
ACPI: XSDT cff40100 00054 (v01 A_M_I_ OEMXSDT 12000810 MSFT 00000097)
ACPI: FACP cff40290 000F4 (v03 A_M_I_ OEMFACP 12000810 MSFT 00000097)
ACPI: DSDT cff40440 09516 (v01 A0963 A0963031 00000031 INTL 20060113)
ACPI: FACS cff4e000 00040
ACPI: APIC cff40390 0006C (v01 A_M_I_ OEMAPIC 12000810 MSFT 00000097)
ACPI: MCFG cff40400 0003C (v01 A_M_I_ OEMMCFG 12000810 MSFT 00000097)
ACPI: OEMB cff4e040 00081 (v01 A_M_I_ AMI_OEM 12000810 MSFT 00000097)
ACPI: HPET cff49960 00038 (v01 A_M_I_ OEMHPET 12000810 MSFT 00000097)
ACPI: OSFR cff499a0 000B0 (v01 A_M_I_ OEMOSFR 12000810 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
3972MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cff40
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048270
free_area_init_node: node 0, pgdat c1663f40, node_mem_map f55fd200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 7945 pages used for memmap
HighMem zone: 812089 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @f5200000 s24064 r0 d20992 u524288
pcpu-alloc: s24064 r0 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038541
Kernel command line: root=/dev/md3 init=/usr/bin/systemd
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:00130000)
Memory: 4145640k/4980736k available (4656k kernel code, 47440k reserved, 1919k data, 380k init, 3280136k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc166d000 - 0xc16cc000 ( 380 kB)
.data : 0xc148c363 - 0xc166c0c0 (1919 kB)
.text : 0xc1000000 - 0xc148c363 (4656 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2671.896 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5343.79 BogoMIPS (lpj=2671896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f4c94000 soft=f4c96000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
Initializing CPU#1
CPU 2 irqstacks, hard=f4ca0000 soft=f4ca2000
#2
smpboot cpu 2: start_ip = 9a000
Initializing CPU#2
CPU 3 irqstacks, hard=f4cb0000 soft=f4cb2000
#3 Ok.
smpboot cpu 3: start_ip = 9a000
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (21372.84 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at cff4e000 (598016 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=10
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT cff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT cff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: SSDT cff4e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: SSDT cff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:29e0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29e1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfe6ffc00-0xfe6fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfe6ff800-0xfe6ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 24: [mem 0xfe6fe800-0xfe6fefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfe6ff400-0xfe6ff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1002:68b8] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe7c0000-0xfe7dffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe7a0000-0xfe7bffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfe7fc000-0xfe7fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: [10b5:8518] type 1 class 0x000604
pci 0000:04:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:05:01.0: [10b5:8518] type 1 class 0x000604
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:05:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:05:02.0: [10b5:8518] type 1 class 0x000604
pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
pci 0000:05:02.0: PME# disabled
pci 0000:05:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:05:03.0: [10b5:8518] type 1 class 0x000604
pci 0000:05:03.0: PME# supported from D0 D3hot D3cold
pci 0000:05:03.0: PME# disabled
pci 0000:05:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:00.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:08:00.0: [10b5:8112] type 1 class 0x000604
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:05:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:09:04.0: [13f6:8788] type 0 class 0x000401
pci 0000:09:04.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:09:04.0: supports D1 D2
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:05:03.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [11ab:6145] type 0 class 0x000101
pci 0000:03:00.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:03:00.0: reg 14: [io 0xc880-0xc883]
pci 0000:03:00.0: reg 18: [io 0xc800-0xc807]
pci 0000:03:00.0: reg 1c: [io 0xc480-0xc483]
pci 0000:03:00.0: reg 20: [io 0xc400-0xc40f]
pci 0000:03:00.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
pci 0000:03:00.0: reg 30: [mem 0xfe980000-0xfe9bffff pref]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:02:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:0a:04.0: [11ab:4320] type 0 class 0x000200
pci 0000:0a:04.0: reg 10: [mem 0xfebfc000-0xfebfffff]
pci 0000:0a:04.0: reg 14: [io 0xe800-0xe8ff]
pci 0000:0a:04.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:0a:04.0: supports D1 D2
pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:04.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 00000000cff40000 - 00000000cfffffff
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x0297]
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0480-0x04bf]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed50000-0xfed8ffff]
pnp 00:07: [mem 0xffa00000-0xffafffff]
pnp 00:07: [mem 0xffb00000-0xffbfffff]
pnp 00:07: [mem 0xffe00000-0xffefffff]
pnp 00:07: [mem 0xfff00000-0xfffffffe]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0480-0x04bf] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0060]
pnp 00:0c: [io 0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xcfffffff]
pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:1c.4: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: BAR 8: can't assign mem (size 0xc00000)
pci 0000:05:01.0: BAR 8: can't assign mem (size 0x200000)
pci 0000:05:01.0: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:05:02.0: BAR 8: can't assign mem (size 0x400000)
pci 0000:05:03.0: BAR 8: can't assign mem (size 0x400000)
pci 0000:05:02.0: BAR 7: can't assign io (size 0x1000)
pci 0000:05:03.0: BAR 7: can't assign io (size 0x1000)
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:05:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:05:03.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:00.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
PCI: No. 2 try to assign unassigned res
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: BAR 8: can't assign mem (size 0xc00000)
pci 0000:05:01.0: BAR 8: can't assign mem (size 0x200000)
pci 0000:05:01.0: BAR 9: can't assign mem pref (size 0x200000)
pci 0000:05:02.0: BAR 8: can't assign mem (size 0x400000)
pci 0000:05:03.0: BAR 8: can't assign mem (size 0x400000)
pci 0000:05:02.0: BAR 7: can't assign io (size 0x1000)
pci 0000:05:03.0: BAR 7: can't assign io (size 0x1000)
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:05:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:02.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:05:03.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:00.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
PCI: No. 3 try to assign unassigned res
release child resource [io 0xd800-0xd8ff]
pci 0000:08:00.0: resource 7 [io 0xd000-0xdfff] released
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:05:01.0: resource 7 [io 0xd000-0xdfff] released
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:04:00.0: resource 7 [io 0xd000-0xdfff] released
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:05:02.0: resource 9 [mem 0xfdf00000-0xfdffffff 64bit pref] released
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:03.0: resource 9 [mem 0xfde00000-0xfdefffff 64bit pref] released
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:04:00.0: resource 9 [mem 0xfde00000-0xfdffffff 64bit pref] released
pci 0000:04:00.0: PCI bridge to [bus 05-09]
release child resource [mem 0xfeae0000-0xfeafffff]
pci 0000:00:1c.0: resource 8 [mem 0xfea00000-0xfeafffff] released
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0400000-0xf16fffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: BAR 8: assigned [mem 0xf0400000-0xf0ffffff]
pci 0000:04:00.0: BAR 9: assigned [mem 0xf1000000-0xf15fffff 64bit pref]
pci 0000:04:00.0: BAR 0: assigned [mem 0xf1600000-0xf161ffff]
pci 0000:04:00.0: BAR 0: set to [mem 0xf1600000-0xf161ffff] (PCI address [0xf1600000-0xf161ffff])
pci 0000:04:00.0: BAR 7: can't assign io (size 0x4000)
pci 0000:05:01.0: BAR 8: assigned [mem 0xf0400000-0xf05fffff]
pci 0000:05:01.0: BAR 9: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:05:02.0: BAR 8: assigned [mem 0xf0600000-0xf09fffff]
pci 0000:05:02.0: BAR 9: assigned [mem 0xf1200000-0xf13fffff 64bit pref]
pci 0000:05:03.0: BAR 8: assigned [mem 0xf0a00000-0xf0dfffff]
pci 0000:05:03.0: BAR 9: assigned [mem 0xf1400000-0xf15fffff 64bit pref]
pci 0000:05:01.0: BAR 7: can't assign io (size 0x2000)
pci 0000:05:02.0: BAR 7: can't assign io (size 0x1000)
pci 0000:05:03.0: BAR 7: can't assign io (size 0x1000)
pci 0000:08:00.0: BAR 7: can't assign io (size 0x1000)
pci 0000:09:04.0: BAR 0: can't assign io (size 0x100)
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:05:01.0: bridge window [mem 0xf0400000-0xf05fffff]
pci 0000:05:01.0: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:02.0: bridge window [mem 0xf0600000-0xf09fffff]
pci 0000:05:02.0: bridge window [mem 0xf1200000-0xf13fffff 64bit pref]
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:05:03.0: bridge window [mem 0xf0a00000-0xf0dfffff]
pci 0000:05:03.0: bridge window [mem 0xf1400000-0xf15fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:04:00.0: bridge window [mem 0xf0400000-0xf0ffffff]
pci 0000:04:00.0: bridge window [mem 0xf1000000-0xf15fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf16fffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
PCI: No. 4 try to assign unassigned res
pci 0000:00:1c.0: resource 7 [io 0xd000-0xdfff] released
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: BAR 7: assigned [io 0x1000-0x4fff]
pci 0000:05:01.0: BAR 7: assigned [io 0x1000-0x2fff]
pci 0000:05:02.0: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:05:03.0: BAR 7: assigned [io 0x4000-0x4fff]
pci 0000:08:00.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:09:04.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:09:04.0: BAR 0: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff])
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0x1000-0x1fff]
pci 0000:05:01.0: PCI bridge to [bus 08-09]
pci 0000:05:01.0: bridge window [io 0x1000-0x2fff]
pci 0000:05:01.0: bridge window [mem 0xf0400000-0xf05fffff]
pci 0000:05:01.0: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:05:02.0: PCI bridge to [bus 07-07]
pci 0000:05:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:05:02.0: bridge window [mem 0xf0600000-0xf09fffff]
pci 0000:05:02.0: bridge window [mem 0xf1200000-0xf13fffff 64bit pref]
pci 0000:05:03.0: PCI bridge to [bus 06-06]
pci 0000:05:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:05:03.0: bridge window [mem 0xf0a00000-0xf0dfffff]
pci 0000:05:03.0: bridge window [mem 0xf1400000-0xf15fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-09]
pci 0000:04:00.0: bridge window [io 0x1000-0x4fff]
pci 0000:04:00.0: bridge window [mem 0xf0400000-0xf0ffffff]
pci 0000:04:00.0: bridge window [mem 0xf1000000-0xf15fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-09]
pci 0000:00:1c.0: bridge window [io 0x1000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf16fffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:01.0: enabling device (0105 -> 0107)
pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:05:01.0: setting latency timer to 64
pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:08:00.0: setting latency timer to 64
pci 0000:05:02.0: enabling device (0106 -> 0107)
pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:02.0: setting latency timer to 64
pci 0000:05:03.0: enabling device (0106 -> 0107)
pci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:05:03.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf16fffff]
pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf0ffffff]
pci_bus 0000:05: resource 2 [mem 0xf1000000-0xf15fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x1000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:08: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xf0600000-0xf09fffff]
pci_bus 0000:07: resource 2 [mem 0xf1200000-0xf13fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xf0a00000-0xf0dfffff]
pci_bus 0000:06: resource 2 [mem 0xf1400000-0xf15fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:0a: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1326745179.382:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
fuse init (API version 7.17)
msgmni has been set to 1690
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:04:00.0: setting latency timer to 64
pcieport 0000:05:01.0: setting latency timer to 64
pcieport 0000:05:02.0: setting latency timer to 64
pcieport 0000:05:03.0: setting latency timer to 64
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1787:0x2288).
[drm] register mmio base: 0xFE7C0000
[drm] register mmio size: 131072
ATOM BIOS: A2128JHA.HGK
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 432752 kiB.
[TTM] Zone highmem: Available graphics memory: 2072820 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading JUNIPER Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DisplayPort
[drm] HPD4
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD5
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I
[drm] HPD6
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fe900 irq 22
ata2: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fe980 irq 22
ata3: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fea00 irq 22
ata4: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6fea80 irq 22
ata5: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6feb00 irq 22
ata6: SATA max UDMA/133 abar m2048@0xfe6fe800 port 0xfe6feb80 irq 22
ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
ahci 0000:03:00.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:03:00.0: masking port_map 0x1f -> 0xf
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0xf impl IDE mode
ahci 0000:03:00.0: flags: 64bit stag slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 16
ata9: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 16
ata10: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 16
ata11: DUMMY
skge 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
skge: 1.14 addr 0xfebfc000 irq 19 chip Yukon-Lite rev 9
skge 0000:0a:04.0: eth0: addr 00:1f:c6:5c:93:38
sky2: driver version 1.30
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:02:00.0: eth1: addr 00:1f:c6:5c:94:1f
usbcore: registered new interface driver ipheth
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_virtuoso 0000:09:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata7: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2671.603 MHz.
Switching to clocksource tsc
usb 6-2: new full-speed USB device number 2 using uhci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
ata2.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
generic-usb 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2/input0
generic-usb 0003:046D:C041.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2/input1
ALSA device list:
#0: Asus Virtuoso 100 at 0x1000, irq 17
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Using IPI No-Shortcut mode
ata3: SATA link down (SStatus 0 SControl 300)
usb 7-2: new low-speed USB device number 2 using uhci_hcd
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input4
microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2/input1
usb 2-1.1: new high-speed USB device number 5 using ehci_hcd
scsi11 : usb-storage 2-1.1:1.0
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL01, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 11:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdc] Spinning up disk...
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
.............................ready
sd 11:0:0:0: [sdc] 1946049 4096-byte logical blocks: (7.97 GB/7.42 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 68 00 00 08
sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 11:0:0:0: [sdc] 1946049 4096-byte logical blocks: (7.97 GB/7.42 GiB)
sdc: unknown partition table
sd 11:0:0:0: [sdc] 1946049 4096-byte logical blocks: (7.97 GB/7.42 GiB)
sd 11:0:0:0: [sdc] Attached SCSI removable disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md3
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
bio: create slab <bio-1> at 1
md/raid0:md3: md_size is 309925376 sectors.
md: RAID0 configuration for md3 - 1 zone
md: zone0=[sda3/sdb3]
zone-offset= 0KB, device-offset= 0KB, size= 154962688KB
md3: detected capacity change from 0 to 158681792512
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 139722752
md: ... autorun DONE.
md3: unknown partition table
EXT4-fs (md3): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (md3): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 9:3.
devtmpfs: mounted
Freeing unused kernel memory: 380k freed
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: systemd 38 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX -SYSVINIT -LIBCRYPTSETUP; gentoo)
systemd[1]: Set hostname to <darwin>.
systemd[1]: Cannot add dependency job for unit avahi-daemon.socket, ignoring: Unit avahi-daemon.socket failed to load: No such file or directory. See system logs and 'systemctl status avahi-daemon.socket' for details.
systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit avahi-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status avahi-daemon.service' for details.
systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
udevd[1135]: starting version 175
EXT4-fs (md3): re-mounted. Opts: (null)
md1: unknown partition table
systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
Adding 530140k swap on /dev/sda2. Priority:0 extents:1 across:530140k SS
Adding 530140k swap on /dev/sdb2. Priority:0 extents:1 across:530140k SS
sky2 0000:02:00.0: eth1: enabling interface
ADDRCONF(NETDEV_UP): eth1: link is not ready
skge 0000:0a:04.0: eth0: enabling interface
EXT4-fs (md3): re-mounted. Opts: commit=0
skge 0000:0a:04.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
eth0: no IPv6 routers present
