The Intel 82378ZB System I/O (SIO) and 82379AB System I/O APIC (SIO.A)
ISA bridges implement PCI interrupt steering with a PIRQ router[1][2]
that is exactly the same as that of the PIIX and ICH southbridges (or
actually the other way round, given that the SIO ASIC was there first).
An earlier version of the SIO, the 82378IB[3][4], does not implement PCI
interrupt steering however, so we need to exclude it by checking the low
nibble of the PCI Revision Identification Register[5][6] for being at
least 3.
There is a note in the 82379AB specification update[7] saying that the
device ID for that chip is 0x7, rather than 0x484 as stated in the
datasheet[8]. It looks like a red herring however, for no report has
been ever seen with that value quoted and it matches the documented
default value of the PCI Command Register, which comes next after the
PCI Device Identification Register, so it looks like a copy-&-paste
editorial mistake.
NB the 82378ZB has been commonly used with smaller DEC Alpha systems
with the contents of the Revision Identification Register reported as
one of 0x3, 0x43, or 0x84, so the masking of the high nibble seems
indeed right by empirical observation. The value in the high nibble
might be either random, or depend on the batch, or correspond to some
other state such as reset straps.
References:
[1] "82378 System I/O (SIO)", Intel Corporation, Order Number:
290473-004, December 1994, Section 4.1.26 "PIRQ[3:0]#--PIRQ Route
Control Registers"
[2] "82378ZB System I/O (SIO) and 82379AB System I/O APIC (SIO.A)",
Intel Corporation, Order Number: 290571-001, March 1996, Section
3.1.25. "PIRQ[3:0]#--PIRQ Route Control Registers", p. 48
[3] "82378IB System I/O (SIO)", Intel Corporation, Order Number:
290473-002, April 1993, Section 5.8.7.7 "Edge and Level Triggered
Modes"
[4] "82378IB to 82378ZB Errata Fix and Feature Enhancement Conversion
FOL933002-01",
<https://web.archive.org/web/19990421045433/http://support.intel.com/support/chipsets/420/8511.htm>
[5] "82378 System I/O (SIO)", Intel Corporation, Order Number:
290473-004, December 1994, Section 4.1.5. "RID--Revision
Identification Register"
[6] "82378ZB System I/O (SIO) and 82379AB System I/O APIC (SIO.A)",
Intel Corporation, Order Number: 290571-001, March 1996, Section
3.1.5. "RID--Revision Identification Register", p. 34
[7] "Intel 82379AB (SIO.A) System I/O Component Specification Update",
Intel Corporation, Order Number: 297734-001, May, 1996, "Component
Identification via Programming Interface", p. 5
[8] "82378ZB System I/O (SIO) and 82379AB System I/O APIC (SIO.A)",
Intel Corporation, Order Number: 290571-001, March 1996, Section
3.1.2. "DID--Device Identification Register", p. 33
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
---
Hi,
This patch was dropped from x86/irq due to a bug in a follow-up patch and
when resent it was not re-picked up along with the other patches for some
reason, so resending verbatim again after another re-verification, against
6.0-rc2 as at yesterday (just before Linus's version bump).
Please apply.
Maciej
Changes from v2:
- Regenerate for a merge conflict.
Changes from v1:
- Add [PATCH] annotation (umm...).
- Fix RID values listed to include 0x84 rather than 0x83 (braino).
---
arch/x86/pci/irq.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
linux-x86-pirq-router-sio.diff
Index: linux-macro/arch/x86/pci/irq.c
===================================================================
--- linux-macro.orig/arch/x86/pci/irq.c
+++ linux-macro/arch/x86/pci/irq.c
@@ -974,11 +974,18 @@ static __init int intel_router_probe(str
return 0;
switch (device) {
+ u8 rid;
case PCI_DEVICE_ID_INTEL_82375:
r->name = "PCEB/ESC";
r->get = pirq_esc_get;
r->set = pirq_esc_set;
return 1;
+ case PCI_DEVICE_ID_INTEL_82378:
+ pci_read_config_byte(router, PCI_REVISION_ID, &rid);
+ /* Tell 82378IB (rev < 3) and 82378ZB/82379AB apart. */
+ if ((rid & 0xfu) < 3)
+ break;
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82371FB_0:
case PCI_DEVICE_ID_INTEL_82371SB_0:
case PCI_DEVICE_ID_INTEL_82371AB_0:
@@ -1020,7 +1027,7 @@ static __init int intel_router_probe(str
case PCI_DEVICE_ID_INTEL_ICH10_3:
case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0:
case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1:
- r->name = "PIIX/ICH";
+ r->name = "SIO/PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
return 1;
@@ -1039,7 +1046,7 @@ static __init int intel_router_probe(str
device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)
|| (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) {
- r->name = "PIIX/ICH";
+ r->name = "SIO/PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
return 1;
