On Tue, Jul 12, 2022 at 12:59:15AM +0200, Pali Rohár wrote: > Register with Subsystem Device/Vendor ID is at offset 0x2c. Export is via > emulated bridge. "Export it..." I suppose. So in short, this patch enables support for the Subsystem Device/Vendor ID - by reading it in the PCI controller config space and storing it in the emulated bridge control structures, so that it is exposed in the respective PCI capability. Correct ? Thanks, Lorenzo > After this change Subsystem ID is visible in lspci output at line: > > Capabilities: [40] Subsystem > > Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> > > --- > Changes in v2: > * Fix wrong rebase, do not add PCIE_CORE_EXP_ROM_BAR_REG > --- > drivers/pci/controller/pci-aardvark.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c > index 74511f015168..060936ef01fe 100644 > --- a/drivers/pci/controller/pci-aardvark.c > +++ b/drivers/pci/controller/pci-aardvark.c > @@ -32,6 +32,7 @@ > #define PCIE_CORE_DEV_ID_REG 0x0 > #define PCIE_CORE_CMD_STATUS_REG 0x4 > #define PCIE_CORE_DEV_REV_REG 0x8 > +#define PCIE_CORE_SSDEV_ID_REG 0x2c > #define PCIE_CORE_PCIEXP_CAP 0xc0 > #define PCIE_CORE_ERR_CAPCTL_REG 0x118 > #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5) > @@ -982,6 +983,8 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) > /* Indicates supports for Completion Retry Status */ > bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS); > > + bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff; > + bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16; > bridge->has_pcie = true; > bridge->data = pcie; > bridge->ops = &advk_pci_bridge_emul_ops; > -- > 2.20.1 >
