[PATCH] PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Register with Subsystem Device/Vendor ID is at offset 0x2c. Export is via
emulated bridge.

After this change Subsystem ID is visible in lspci output at line:

  Capabilities: [40] Subsystem

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
---
 drivers/pci/controller/pci-aardvark.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 74511f015168..924c9397a9a4 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -32,6 +32,8 @@
 #define PCIE_CORE_DEV_ID_REG					0x0
 #define PCIE_CORE_CMD_STATUS_REG				0x4
 #define PCIE_CORE_DEV_REV_REG					0x8
+#define PCIE_CORE_SSDEV_ID_REG					0x2c
+#define PCIE_CORE_EXP_ROM_BAR_REG				0x30
 #define PCIE_CORE_PCIEXP_CAP					0xc0
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
@@ -982,6 +984,8 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 	/* Indicates supports for Completion Retry Status */
 	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
 
+	bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff;
+	bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16;
 	bridge->has_pcie = true;
 	bridge->data = pcie;
 	bridge->ops = &advk_pci_bridge_emul_ops;
-- 
2.20.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux