Having the generic compatible strings constraints with the 'any'+'generic string' semantic implicitly encourages either to add new DW PCIe-based DT-bindings with the generic compatible string attached or just forget about adding new DT-bindings since the corresponding DT-node will be evaluated anyway. Moreover having that semantic implemented in the generic DT-schema causes the DT-validation tool to apply the schema twice: first by implicit compatible-string-based selection and second by means of the 'allOf: [ $ref ]' statement. Let's fix all of that by dropping the compatible property constraints and selecting the generic DT-schema only for the purely generic DW PCIe DT-nodes. The later is required since there is a driver for such devices. (Though there are no such DT-nodes currently defined in the kernel DT sources.) Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ by the Rob' request. (@Rob) - Fix compatible property schema so one would work as expected: string must contain either generic DW PCIe IP-core name or both generic and equipped with IP-core version names. Changelog v5: - Switch the patch from not-selecting the generic schemas to applying them to the generic DW PCIe device nodes only. - Drop the generic compatible string used as fallback. (@Rob) --- .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 16 ++++++++++------ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 16 ++++++++++------ 2 files changed, 20 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index fc3b5d4ac245..d04001248b53 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -13,16 +13,20 @@ maintainers: description: | Synopsys DesignWare PCIe host controller endpoint +# Please create a separate DT-schema for your DWC PCIe Endpoint controller +# and make sure it's assigned with the vendor-specific compatible string. +select: + properties: + compatible: + const: snps,dw-pcie-ep + required: + - compatible + allOf: - $ref: /schemas/pci/pci-ep.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# properties: - compatible: - anyOf: - - {} - - const: snps,dw-pcie-ep - reg: description: | It should contain Data Bus Interface (dbi) and config registers for all @@ -38,9 +42,9 @@ properties: enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl] required: + - compatible - reg - reg-names - - compatible additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index e787b9727589..85861b71d9ff 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -13,16 +13,20 @@ maintainers: description: | Synopsys DesignWare PCIe host controller +# Please create a separate DT-schema for your DWC PCIe Root Port controller +# and make sure it's assigned with the vendor-specific compatible string. +select: + properties: + compatible: + const: snps,dw-pcie + required: + - compatible + allOf: - $ref: /schemas/pci/pci-bus.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# properties: - compatible: - anyOf: - - {} - - const: snps,dw-pcie - reg: description: | It should contain Data Bus Interface (dbi) and config registers for all @@ -47,9 +51,9 @@ properties: additionalProperties: true required: + - compatible - reg - reg-names - - compatible examples: - | -- 2.35.1
