On Fri, Jun 10, 2022 at 12:14:35PM +0300, Serge Semin wrote: > This is a final patchset in the series created in the framework of > my Baikal-T1 PCIe/eDMA-related work: > > [1: In-progress v4] PCI: dwc: Various fixes and cleanups > Link: https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > [2: In-progress v3] PCI: dwc: Add hw version and dma-ranges support > Link: https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > [3: In-progress v3] PCI: dwc: Add generic resources and Baikal-T1 support > Link: https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > [4: In-progress v3] dmaengine: dw-edma: Add RP/EP local DMA support > Link: ---you are looking at it--- > > Note it is very recommended to merge the patchsets in the same order as > they are listed in the set above in order to have them applied smoothly. > Nothing prevents them from being reviewed synchronously though. > > Please note originally this series was self content, but due to Frank > being a bit faster in his work submission I had to rebase my patchset onto > his one. So now this patchset turns to be dependent on the Frank' work: > > Link: https://lore.kernel.org/linux-pci/20220524152159.2370739-1-Frank.Li@xxxxxxx/ > > So please merge Frank' series first before applying this one. > > Here is a short summary regarding this patchset. The series starts with > fixes patches. We discovered that the dw-edma-pcie.c driver incorrectly > initializes the LL/DT base addresses for the platforms with not matching > CPU and PCIe memory spaces. It is fixed by using the pci_bus_address() > method to get a correct base address. After that you can find a series of > the interleaved xfers fixes. It turned out the interleaved transfers > implementation didn't work quite correctly from the very beginning for > instance missing src/dst addresses initialization, etc. In the framework > of the next two patches we suggest to add a new platform-specific > callback - pci_address() and use it to convert the CPU address to the PCIe > space address. It is at least required for the DW eDMA remote End-point > setup on the platforms with not-matching CPU/PCIe address spaces. In case > of the DW eDMA local RP/EP setup the conversion will be done automatically > by the outbound iATU (if no DMA-bypass flag is specified for the > corresponding iATU window). Then we introduce a set of the patches to make > the DebugFS part of the code supporting the multi-eDMA controllers > platforms. It starts with several cleanup patches and is closed joining > the Read/Write channels into a single DMA-device as they originally should > have been. After that you can find the patches with adding the non-atomic > io-64 methods usage, dropping DT-region descriptors allocation, replacing > chip IDs with the device name. In addition to that in order to have the > eDMA embedded into the DW PCIe RP/EP supported we need to bypass the > dma-ranges-based memory ranges mapping since in case of the root port DT > node it's applicable for the peripheral PCIe devices only. Finally at the > series closure we introduce a generic DW eDMA controller support being > available in the DW PCIe Root Port/Endpoint driver. > > Link: https://lore.kernel.org/linux-pci/20220324014836.19149-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > Changelog v2: > - Drop the patches: > [PATCH 1/25] dmaengine: dw-edma: Drop dma_slave_config.direction field usage > [PATCH 2/25] dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics > since they are going to be merged in in the framework of the > Frank's patchset. > - Add a new patch: "dmaengine: dw-edma: Release requested IRQs on > failure." > - Drop __iomem qualifier from the struct dw_edma_debugfs_entry instance > definition in the dw_edma_debugfs_u32_get() method. (@Manivannan) > - Add a new patch: "dmaengine: dw-edma: Rename DebugFS dentry variables to > 'dent'." (@Manivannan) > - Slightly extend the eDMA name array size. (@Manivannan) > - Change the specific DMA mapping comment a bit to being > clearer. (@Manivannan) > - Add a new patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection > method." > - Don't fail eDMA detection procedure if the DW eDMA driver couldn't probe > device. That happens if the driver is disabled. (@Manivannan) > - Add "dma" registers resource mapping procedure. (@Manivannan) > - Move the eDMA CSRs space detection into the dw_pcie_map_detect() method. > - Remove eDMA on the dw_pcie_ep_init() internal errors. (@Manivannan) > - Remove eDMA in the dw_pcie_ep_exit() method. > - Move the dw_pcie_edma_detect() method execution to the tail of the > dw_pcie_ep_init() function. > > Link: https://lore.kernel.org/linux-pci/20220503225104.12108-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > Changelog v3: > - Conditionally set dchan->dev->device.dma_coherent field since it can > be missing on some platforms. (@Manivannan) > - Drop the patch: "PCI: dwc: Add generic iATU/eDMA CSRs space detection > method". A similar modification has been done in another patchset. > - Add more comprehensive and less regression prune eDMA block detection > procedure. > - Drop the patch: "dma-direct: take dma-ranges/offsets into account in > resource mapping". It will be separately reviewed. > - Remove Manivannan tb tag from the modified patches. @Mani, several patches have been changed. Could you have a look at the series one more time? -Sergey > - Rebase onto the kernel v5.18. > > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> > Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx> > Cc: Pavel Parkhomenko <Pavel.Parkhomenko@xxxxxxxxxxxxxxxxxxxx> > Cc: "Krzysztof Wilczyński" <kw@xxxxxxxxx> > Cc: linux-pci@xxxxxxxxxxxxxxx > Cc: dmaengine@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > > Serge Semin (24): > dmaengine: Fix dma_slave_config.dst_addr description > dmaengine: dw-edma: Release requested IRQs on failure > dmaengine: dw-edma: Convert ll/dt phys-address to PCIe bus/DMA address > dmaengine: dw-edma: Fix missing src/dst address of the interleaved > xfers > dmaengine: dw-edma: Don't permit non-inc interleaved xfers > dmaengine: dw-edma: Fix invalid interleaved xfers semantics > dmaengine: dw-edma: Add CPU to PCIe bus address translation > dmaengine: dw-edma: Add PCIe bus address getter to the remote EP > glue-driver > dmaengine: dw-edma: Drop chancnt initialization > dmaengine: dw-edma: Fix DebugFS reg entry type > dmaengine: dw-edma: Stop checking debugfs_create_*() return value > dmaengine: dw-edma: Add dw_edma prefix to the DebugFS nodes descriptor > dmaengine: dw-edma: Convert DebugFS descs to being kz-allocated > dmaengine: dw-edma: Rename DebugFS dentry variables to 'dent' > dmaengine: dw-edma: Simplify the DebugFS context CSRs init procedure > dmaengine: dw-edma: Move eDMA data pointer to DebugFS node descriptor > dmaengine: dw-edma: Join Write/Read channels into a single device > dmaengine: dw-edma: Use DMA-engine device DebugFS subdirectory > dmaengine: dw-edma: Use non-atomic io-64 methods > dmaengine: dw-edma: Drop DT-region allocation > dmaengine: dw-edma: Replace chip ID number with device name > dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup > dmaengine: dw-edma: Skip cleanup procedure if no private data found > PCI: dwc: Add DW eDMA engine support > > drivers/dma/dw-edma/dw-edma-core.c | 216 +++++----- > drivers/dma/dw-edma/dw-edma-core.h | 10 +- > drivers/dma/dw-edma/dw-edma-pcie.c | 24 +- > drivers/dma/dw-edma/dw-edma-v0-core.c | 76 ++-- > drivers/dma/dw-edma/dw-edma-v0-core.h | 1 - > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 372 ++++++++---------- > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 5 - > .../pci/controller/dwc/pcie-designware-ep.c | 12 +- > .../pci/controller/dwc/pcie-designware-host.c | 13 +- > drivers/pci/controller/dwc/pcie-designware.c | 186 +++++++++ > drivers/pci/controller/dwc/pcie-designware.h | 20 + > include/linux/dma/edma.h | 18 +- > include/linux/dmaengine.h | 2 +- > 13 files changed, 589 insertions(+), 366 deletions(-) > > -- > 2.35.1 >