[PATCH 04/12] PCI: dwc: Disable outbound windows for controllers with iATU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In accordance with the dw_pcie_setup_rc() method semantics and judging by
what the comment added in commit dd193929d91e ("PCI: designware: Explain
why we don't program ATU for some platforms") states there are DWC
PCIe-available platforms like Keystone (pci-keystone.c) or Amazon's
Annapurna Labs (pcie-al.c) which don't have the DW PCIe internal ATU
enabled and use it's own address translation approach implemented. In
these cases at the very least there is no point in touching the DW PCIe
iATU CSRs. Moreover depending on the vendor-specific address translation
implementation it might be even erroneous. So let's move the iATU windows
disabling procedure to being under the corresponding conditional statement
clause thus performing that procedure only if the iATU is expected to be
available on the platform.

Fixes: 458ad06c4cdd ("PCI: dwc: Ensure all outbound ATU windows are reset")
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index f89e6552139b..a048d88e0c30 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -566,7 +566,6 @@ static struct pci_ops dw_pcie_ops = {
 
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
-	int i;
 	u32 val, ctrl, num_ctrls;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 
@@ -618,19 +617,22 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 		PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
 	dw_pcie_writel_dbi(pci, PCI_COMMAND, val);
 
-	/* Ensure all outbound windows are disabled so there are multiple matches */
-	for (i = 0; i < pci->num_ob_windows; i++)
-		dw_pcie_disable_atu(pci, i, DW_PCIE_REGION_OUTBOUND);
-
 	/*
 	 * If the platform provides its own child bus config accesses, it means
 	 * the platform uses its own address translation component rather than
 	 * ATU, so we should not program the ATU here.
 	 */
 	if (pp->bridge->child_ops == &dw_child_pcie_ops) {
-		int atu_idx = 0;
+		int i, atu_idx = 0;
 		struct resource_entry *entry;
 
+		/*
+		 * Ensure all outbound windows are disabled so there are
+		 * multiple matches
+		 */
+		for (i = 0; i < pci->num_ob_windows; i++)
+			dw_pcie_disable_atu(pci, i, DW_PCIE_REGION_OUTBOUND);
+
 		/* Get last memory resource entry */
 		resource_list_for_each_entry(entry, &pp->bridge->windows) {
 			if (resource_type(entry->res) != IORESOURCE_MEM)
-- 
2.35.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux