The calls to devm_gpiod_get_optional() have the -gpios at the end of the name. This means the pcie driver is not finding the necessary reset or power GPOOs to allow the PCIe devices on the SiFive Unmatched boards. This has not been a noted bug as the PCIe probe from u-boot has been required to get the PCIe working due to other issues with the system setup. It could have been broken since the driver inclusion, and not been noticed as it is not necessary for the driver to funciton. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-fu740.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c index 00cde9a248b5..842b7202b96e 100644 --- a/drivers/pci/controller/dwc/pcie-fu740.c +++ b/drivers/pci/controller/dwc/pcie-fu740.c @@ -259,11 +259,11 @@ static int fu740_pcie_probe(struct platform_device *pdev) return PTR_ERR(afp->mgmt_base); /* Fetch GPIOs */ - afp->reset = devm_gpiod_get_optional(dev, "reset-gpios", GPIOD_OUT_LOW); + afp->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(afp->reset)) return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n"); - afp->pwren = devm_gpiod_get_optional(dev, "pwren-gpios", GPIOD_OUT_LOW); + afp->pwren = devm_gpiod_get_optional(dev, "pwren", GPIOD_OUT_LOW); if (IS_ERR(afp->pwren)) return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n"); -- 2.34.1
