Re: Question about deadlock between AER and pceihp interrupts during resume from S3 with unplugged device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 10, 2022 at 03:47:10PM -0500, Andrey Grodzovsky wrote:
> So the patches indeed helped resolving the deadlock but when we try
> again to hotplug back there is a link status failure
> 
> pcieport 0000:00:01.1: pciehp: Slot(0): Card present
> pcieport 0000:00:01.1: Data Link Layer Link Active not set in 1000 msec
> pcieport 0000:00:01.1: pciehp: Failed to check link status
> 
> and more detailed  bellow,
> we are trying to debug but again, you might have a quick insight

Well, the link doesn't come up.  Is the Link Disable bit in the
Link Control Register set for some reason?  Perhaps some ACPI method
fiddled with it?

Compare the output of lspci -vv before and after the system sleep
transition, do you see anything suspicious?

If you reset the slot via sysfs, does the link come back up?

You may want to open a bug over at bugzilla.kernel.org and attach
the full dmesg output which didn't reach the list, as well as lspci
output.

Did you apply only my deadlock fix or also Kai-Heng Feng's AER disablement
patch?

Thanks,

Lukas



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux