The calls to devm_gpiod_get_optional() have the -gpios on the name. This means the pcie driver is not finding the necessary reset or power gpios to allow the pcie devices on the SiFive Unmatched boards. Note, this was workng around 5.16 and may not have been broken? There is still an issue if uboot has not probed the pcie bus then there are no pcie devices shown when Linux is started. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-fu740.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c index 00cde9a248b5..842b7202b96e 100644 --- a/drivers/pci/controller/dwc/pcie-fu740.c +++ b/drivers/pci/controller/dwc/pcie-fu740.c @@ -259,11 +259,11 @@ static int fu740_pcie_probe(struct platform_device *pdev) return PTR_ERR(afp->mgmt_base); /* Fetch GPIOs */ - afp->reset = devm_gpiod_get_optional(dev, "reset-gpios", GPIOD_OUT_LOW); + afp->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(afp->reset)) return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n"); - afp->pwren = devm_gpiod_get_optional(dev, "pwren-gpios", GPIOD_OUT_LOW); + afp->pwren = devm_gpiod_get_optional(dev, "pwren", GPIOD_OUT_LOW); if (IS_ERR(afp->pwren)) return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n"); -- 2.34.1
