On Wed, Jan 12, 2022 at 03:42:56PM +0100, Sergio Paracuellos wrote: > Hi Bjorn, Lorenzo, > > On Tue, Dec 7, 2021 at 11:49 AM Sergio Paracuellos > <sergio.paracuellos@xxxxxxxxx> wrote: > > > > Hi all, > > > > MIPS specific code can be removed from driver and put into ralink mt7621 > > instead which is a more accurate place to do this. To make this possible > > we need to have access to 'bridge->windows' in 'pcibios_root_bridge_prepare()' > > which has been implemented for ralink mt7621 platform (there is no real > > need to implement this for any other platforms since those ones haven't got > > I/O coherency units). This also allow us to properly enable this driver to > > completely be enabled for COMPILE_TEST. This patchset appoarch: > > - Move windows list splice in 'pci_register_host_bridge()' after function > > 'pcibios_root_bridge_prepare()' is called. > > - Implement 'pcibios_root_bridge_prepare()' for ralink mt7621. > > - Avoid custom MIPs code in pcie-mt7621 driver. > > - Add missing 'MODULE_LICENSE()' to pcie-mt7621 driver to avoid compile test > > module compilation to complain (already sent patch from Yanteng Si that > > I have rewrite commit message and long description a bit. > > - Remove MIPS conditional code from Kconfig and mark driver as 'tristate'. > > > > This patchset is a real fix for some errors reported by Kernel Test Robot about > > implicit mips functions used in driver code and fix errors in driver when > > is compiled as a module [1] (mips:allmodconfig). > > > > Changes in v3: > > - Rebase the series on the top of the temporal fix sent for v5.16[3] for > > the module compilation problem. > > - Address review comments from Guenter in PATCH 2 (thanks Guenter!): > > - Address TODO in comment about the hardware does not allow zeros > > after 1s for the mask and WARN_ON if that's happend. > > - Be sure mask is real valid upper 16 bits. > > What are your plans for this series? Can we merge this? I was waiting for an ACK on patch (2) since it affects MIPS code. It would also be great if Bjorn reviewed it to make sure he agrees with the approach. I think it is too late for this cycle, apologies, there is a significant review backlog. Lorenzo > Best regards, > Sergio Paracuellos > > > > > Changes in v2: > > - Collect Acked-by from Arnd Bergmann for PATCH 1. > > - Collect Reviewed-by from Krzysztof Wilczyński for PATCH 4. > > - Adjust some patches commit subject and message as pointed out by Bjorn in review of v1 of the series[2]. > > > > This patchset is the good way of properly compile driver as a module removing > > all MIPS specific code into arch ralink mt7621 place. To avoid mips:allmodconfig reported > > problems for v5.16 the following patch has been sent[3]. This series are rebased onto this patch to provide > > a real fix for this problem. > > > > [0]: https://lore.kernel.org/linux-mips/CAMhs-H8ShoaYiFOOzJaGC68nZz=V365RXN_Kjuj=fPFENGJiiw@xxxxxxxxxxxxxx/T/#t > > [1]: https://lkml.org/lkml/2021/11/14/436 > > [2]: https://lore.kernel.org/r/20211115070809.15529-1-sergio.paracuellos@xxxxxxxxx > > [3]: https://lore.kernel.org/linux-pci/20211203192454.32624-1-sergio.paracuellos@xxxxxxxxx/T/#u > > > > Thanks in advance for your time. > > > > Best regards, > > Sergio Paracuellos > > > > Sergio Paracuellos (5): > > PCI: Let pcibios_root_bridge_prepare() access to 'bridge->windows' > > MIPS: ralink: implement 'pcibios_root_bridge_prepare()' > > PCI: mt7621: Avoid custom MIPS code in driver code > > PCI: mt7621: Add missing 'MODULE_LICENSE()' definition > > PCI: mt7621: Allow COMPILE_TEST for all arches > > > > arch/mips/ralink/mt7621.c | 31 ++++++++++++++++++++++ > > drivers/pci/controller/Kconfig | 4 +-- > > drivers/pci/controller/pcie-mt7621.c | 39 ++-------------------------- > > drivers/pci/probe.c | 4 +-- > > 4 files changed, 37 insertions(+), 41 deletions(-) > > > > -- > > 2.33.0 > >
