Add support for reporting PCI_EXP_LNKSTA_DLLLA bit in Link Control register on emulated bridge via PCIE_STAT_OFF reg. Function mvebu_pcie_link_up() already parses this register and returns if Data Link is Active or not. Also correctly indicate DLLLA capability via PCI_EXP_LNKCAP_DLLLARC bit in Link Control Capability register which is required for reporting DLLLA bit. Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> --- drivers/pci/controller/pci-mvebu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index dffa330de174..a075ba26cff1 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -548,13 +548,18 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, /* * PCIe requires that the Clock Power Management capability bit * is hard-wired to zero for downstream ports but HW returns 1. + * Additionally enable Data Link Layer Link Active Reporting + * Capable bit as DL_Active indication is provided too. */ - *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) & - ~PCI_EXP_LNKCAP_CLKPM; + *value = (mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) & + ~PCI_EXP_LNKCAP_CLKPM) | PCI_EXP_LNKCAP_DLLLARC; break; case PCI_EXP_LNKCTL: - *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); + /* DL_Active indication is provided via PCIE_STAT_OFF */ + *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL) | + (mvebu_pcie_link_up(port) ? + (PCI_EXP_LNKSTA_DLLLA << 16) : 0); break; case PCI_EXP_SLTCTL: -- 2.20.1
