According to PCI specifications bits [0:2] of Command Register, this should be by default disabled on reset. So explicitly disable these bits at early beginning of driver initialization. Also remove code which unconditionally enables all 3 bits and let kernel code (via pci_set_master() function) to handle bus mastering of PCI Bridge via emulated PCI_COMMAND on emulated bridge. Adjust existing functions mvebu_pcie_handle_iobase_change() and mvebu_pcie_handle_membase_change() to handle PCI_IO_BASE and PCI_MEM_BASE registers correctly even when bus mastering on emulated bridge is disabled. Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/pci/controller/pci-mvebu.c | 52 ++++++++++++++++++------------ 1 file changed, 32 insertions(+), 20 deletions(-) diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index a3df352d440e..32694763e930 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -226,16 +226,14 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) { u32 cmd, mask; - /* Point PCIe unit MBUS decode windows to DRAM space. */ - mvebu_pcie_setup_wins(port); - - /* Master + slave enable. */ + /* Disable Root Bridge I/O space, memory space and bus mastering. */ cmd = mvebu_readl(port, PCIE_CMD_OFF); - cmd |= PCI_COMMAND_IO; - cmd |= PCI_COMMAND_MEMORY; - cmd |= PCI_COMMAND_MASTER; + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); mvebu_writel(port, cmd, PCIE_CMD_OFF); + /* Point PCIe unit MBUS decode windows to DRAM space. */ + mvebu_pcie_setup_wins(port); + /* Enable interrupt lines A-D. */ mask = mvebu_readl(port, PCIE_MASK_OFF); mask |= PCIE_MASK_ENABLE_INTS; @@ -385,8 +383,7 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) /* Are the new iobase/iolimit values invalid? */ if (conf->iolimit < conf->iobase || - conf->iolimitupper < conf->iobaseupper || - !(conf->command & PCI_COMMAND_IO)) { + conf->iolimitupper < conf->iobaseupper) { mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, &port->iowin); return; @@ -423,8 +420,7 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) struct pci_bridge_emul_conf *conf = &port->bridge.conf; /* Are the new membase/memlimit values invalid? */ - if (conf->memlimit < conf->membase || - !(conf->command & PCI_COMMAND_MEMORY)) { + if (conf->memlimit < conf->membase) { mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, &port->memwin); return; @@ -444,6 +440,24 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) &port->memwin); } +static pci_bridge_emul_read_status_t +mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge, + int reg, u32 *value) +{ + struct mvebu_pcie_port *port = bridge->data; + + switch (reg) { + case PCI_COMMAND: + *value = mvebu_readl(port, PCIE_CMD_OFF); + break; + + default: + return PCI_BRIDGE_EMUL_NOT_HANDLED; + } + + return PCI_BRIDGE_EMUL_HANDLED; +} + static pci_bridge_emul_read_status_t mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, int reg, u32 *value) @@ -498,17 +512,14 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge, switch (reg) { case PCI_COMMAND: - { - if (!mvebu_has_ioport(port)) - conf->command &= ~PCI_COMMAND_IO; - - if ((old ^ new) & PCI_COMMAND_IO) - mvebu_pcie_handle_iobase_change(port); - if ((old ^ new) & PCI_COMMAND_MEMORY) - mvebu_pcie_handle_membase_change(port); + if (!mvebu_has_ioport(port)) { + conf->command = cpu_to_le16( + le16_to_cpu(conf->command) & ~PCI_COMMAND_IO); + new &= ~PCI_COMMAND_IO; + } + mvebu_writel(port, new, PCIE_CMD_OFF); break; - } case PCI_IO_BASE: /* @@ -575,6 +586,7 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, } static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = { + .read_base = mvebu_pci_bridge_emul_base_conf_read, .write_base = mvebu_pci_bridge_emul_base_conf_write, .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read, .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write, -- 2.20.1