[PATCH] PCI: brcmstb: Do not use __GENMASK

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Define the legacy MSI intterupt bitmask as well as the non-legacy
interrupt bitmask using GENMASK and then use them in brcm_msi_set_regs()
in place of __GENMASK().

Reported-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/pci/controller/pcie-brcmstb.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 1fc7bd49a7ad..3391b4135b65 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -144,6 +144,9 @@
 #define BRCM_INT_PCI_MSI_NR		32
 #define BRCM_INT_PCI_MSI_LEGACY_NR	8
 #define BRCM_INT_PCI_MSI_SHIFT		0
+#define BRCM_INT_PCI_MSI_MASK		GENMASK(BRCM_INT_PCI_MSI_NR - 1, 0)
+#define BRCM_INT_PCI_MSI_LEGACY_MASK	GENMASK(31, \
+						32 - BRCM_INT_PCI_MSI_LEGACY_NR)
 
 /* MSI target addresses */
 #define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
@@ -619,7 +622,8 @@ static void brcm_msi_remove(struct brcm_pcie *pcie)
 
 static void brcm_msi_set_regs(struct brcm_msi *msi)
 {
-	u32 val = __GENMASK(31, msi->legacy_shift);
+	u32 val = msi->legacy ? BRCM_INT_PCI_MSI_LEGACY_MASK :
+				BRCM_INT_PCI_MSI_MASK;
 
 	writel(val, msi->intr_base + MSI_INT_MASK_CLR);
 	writel(val, msi->intr_base + MSI_INT_CLR);
-- 
2.25.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux