Re: [PATCH v15 00/13] Add support for Hikey 970 PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Tue, 26 Oct 2021 18:17:28 +0100
Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> escreveu:

> On Thu, Oct 21, 2021 at 11:45:07AM +0100, Mauro Carvalho Chehab wrote:
> > Hi Lorenzo,
> > 
> > I split patch 09/10 from v13 into three patches, in order to have one logical
> > change per patch, adding a proper descriptio to each of them. The final
> > code didn change.
> > 
> > The pcie-kirin PCIe driver contains internally a PHY interface for
> > Kirin 960, but it misses support for Kirin 970. A new PHY driver
> > for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c
> > (already merged via PHY tree).
> > 
> > Add support for Kirin 970 PHY driver at the pcie-kirin.c.
> > 
> > While here, also add the needed logic to compile it as module and
> > to allow to dynamically remove the driver in runtime.
> > 
> > Tested on HiKey970:
> > 
> >   # lspci -D -PP
> >   0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
> >   0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> >   0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809
> >   0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
> > 
> > Tested on HiKey960:
> > 
> >   # lspci -D 
> >   0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
> > 
> > ---
> > 
> > v15:
> >   - The power-off fix patch was split into 3, in order to have one logical change
> >     per patch.
> >   -  Removed Fixes: tag from the poweroff patch;
> >   - Adjusted capitalization of two patch summary lines
> >   - No functional changes. The diff of this series is identical to v14.
> > 
> > v14:
> >   - Split a timeout logic from patch 4, placing it on a separate patch;
> >   - Added fixes: and cc: tags to the power_off fixup patch;
> >   - change a typecast from of_data to long, in order to avoid a warning on
> >     some randconfigs;
> >   - removed uneeded brackets at the power_off patch;
> >   - reordered struct device pointers at kirin_pcie_get_resource();
> >   - added a c/c to kishon at the PHY-related patches.
> > 
> > v13:
> >   - Added Xiaowei's ack for the series.
> > 
> > v12:
> >   - Change a comment at patch 1 to not use c99 style.
> > 
> > v11:
> >   - patch 5 changed to use the right PCIe topology
> >   - all other patches are identical to v10.
> > 
> > v10:
> >   - patch 1: dropped magic numbers from PHY driver
> >   - patch 5: allow pcie child nodes without reset-gpios
> >   - all other patches are identical to v9.
> > 
> > v9:
> >   - Did some cleanups at patches 1 and 5
> > 
> > Mauro Carvalho Chehab (13):
> >   PCI: kirin: Reorganize the PHY logic inside the driver
> >   PCI: kirin: Add support for a PHY layer
> >   PCI: kirin: Use regmap for APB registers
> >   PCI: kirin: Add support for bridge slot DT schema
> >   PCI: kirin: Give more time for PERST# reset to finish
> >   PCI: kirin: Add Kirin 970 compatible
> >   PCI: kirin: Add MODULE_* macros
> >   PCI: kirin: Allow building it as a module
> >   PCI: kirin: Add power_off support for Kirin 960 PHY
> >   PCI: kirin: Move the power-off code to a common routine
> >   PCI: kirin: Disable clkreq during poweroff sequence
> >   PCI: kirin: De-init the dwc driver
> >   PCI: kirin: Allow removing the driver
> > 
> >  drivers/pci/controller/dwc/Kconfig      |   2 +-
> >  drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------
> >  2 files changed, 497 insertions(+), 148 deletions(-)  
> 
> Applied to pci/dwc for v5.16, please have a look at the resulting
> branch and commits. 

Thanks!

Everything looks fine to me.

Best regards,
Mauro



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux