Hi Lorenzo, I split patch 09/10 from v13 into three patches, in order to have one logical change per patch, adding a proper descriptio to each of them. The final code didn change. The pcie-kirin PCIe driver contains internally a PHY interface for Kirin 960, but it misses support for Kirin 970. A new PHY driver for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c (already merged via PHY tree). Add support for Kirin 970 PHY driver at the pcie-kirin.c. While here, also add the needed logic to compile it as module and to allow to dynamically remove the driver in runtime. Tested on HiKey970: # lspci -D -PP 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01) 0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809 0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Tested on HiKey960: # lspci -D 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01) --- v15: - The power-off fix patch was split into 3, in order to have one logical change per patch. - Removed Fixes: tag from the poweroff patch; - Adjusted capitalization of two patch summary lines - No functional changes. The diff of this series is identical to v14. v14: - Split a timeout logic from patch 4, placing it on a separate patch; - Added fixes: and cc: tags to the power_off fixup patch; - change a typecast from of_data to long, in order to avoid a warning on some randconfigs; - removed uneeded brackets at the power_off patch; - reordered struct device pointers at kirin_pcie_get_resource(); - added a c/c to kishon at the PHY-related patches. v13: - Added Xiaowei's ack for the series. v12: - Change a comment at patch 1 to not use c99 style. v11: - patch 5 changed to use the right PCIe topology - all other patches are identical to v10. v10: - patch 1: dropped magic numbers from PHY driver - patch 5: allow pcie child nodes without reset-gpios - all other patches are identical to v9. v9: - Did some cleanups at patches 1 and 5 Mauro Carvalho Chehab (13): PCI: kirin: Reorganize the PHY logic inside the driver PCI: kirin: Add support for a PHY layer PCI: kirin: Use regmap for APB registers PCI: kirin: Add support for bridge slot DT schema PCI: kirin: Give more time for PERST# reset to finish PCI: kirin: Add Kirin 970 compatible PCI: kirin: Add MODULE_* macros PCI: kirin: Allow building it as a module PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Move the power-off code to a common routine PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: De-init the dwc driver PCI: kirin: Allow removing the driver drivers/pci/controller/dwc/Kconfig | 2 +- drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------ 2 files changed, 497 insertions(+), 148 deletions(-) -- 2.31.1