Before code refactor, the PERST# signals were sent at the end of the power_on logic. Then, the PCI core would probe for the buses and add them. The new logic changed it to send PERST# signals during add_bus operation. That altered the timings. Also, HiKey 970 require a little more waiting time for the PCI bridge - which is outside the SoC - to finish the PERST# reset, and then initialize the eye diagram. So, increase the waiting time for the PERST# signals to what's required for it to also work with HiKey 970. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- To mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v15 00/13] at: https://lore.kernel.org/all/cover.1634812676.git.mchehab+huawei@xxxxxxxxxx/ drivers/pci/controller/dwc/pcie-kirin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c index de375795a3b8..bc329673632a 100644 --- a/drivers/pci/controller/dwc/pcie-kirin.c +++ b/drivers/pci/controller/dwc/pcie-kirin.c @@ -113,7 +113,7 @@ struct kirin_pcie { #define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000 /* Time for delay */ -#define REF_2_PERST_MIN 20000 +#define REF_2_PERST_MIN 21000 #define REF_2_PERST_MAX 25000 #define PERST_2_ACCESS_MIN 10000 #define PERST_2_ACCESS_MAX 12000 -- 2.31.1
