Correct a number of misspelled words and remove any words that were
duplicated in the PCI tree. No change to functionality intended.
Signed-off-by: Krzysztof Wilczyński <kw@xxxxxxxxx>
---
drivers/pci/controller/pci-xgene-msi.c | 2 +-
drivers/pci/controller/pcie-brcmstb.c | 2 +-
drivers/pci/controller/pcie-iproc.c | 2 +-
drivers/pci/endpoint/pci-epc-core.c | 2 +-
drivers/pci/endpoint/pci-epf-core.c | 4 ++--
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pci/hotplug/cpqphp_ctrl.c | 4 ++--
drivers/pci/hotplug/ibmphp.h | 4 ++--
drivers/pci/hotplug/shpchp_hpc.c | 2 +-
drivers/pci/pci-driver.c | 2 +-
drivers/pci/pcie/aer.c | 2 +-
drivers/pci/quirks.c | 2 +-
12 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/pci-xgene-msi.c b/drivers/pci/controller/pci-xgene-msi.c
index b7a8e062fcc5..c50ff279903c 100644
--- a/drivers/pci/controller/pci-xgene-msi.c
+++ b/drivers/pci/controller/pci-xgene-msi.c
@@ -302,7 +302,7 @@ static void xgene_msi_isr(struct irq_desc *desc)
/*
* MSIINTn (n is 0..F) indicates if there is a pending MSI interrupt
- * If bit x of this register is set (x is 0..7), one or more interupts
+ * If bit x of this register is set (x is 0..7), one or more interrupts
* corresponding to MSInIRx is set.
*/
grp_select = xgene_msi_int_read(xgene_msi, msi_grp);
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index cc30215f5a43..1fc7bd49a7ad 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -145,7 +145,7 @@
#define BRCM_INT_PCI_MSI_LEGACY_NR 8
#define BRCM_INT_PCI_MSI_SHIFT 0
-/* MSI target adresses */
+/* MSI target addresses */
#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 30ac5fbefbbf..36b9d2c46cfa 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -249,7 +249,7 @@ enum iproc_pcie_reg {
/*
* To hold the address of the register where the MSI writes are
- * programed. When ARM GICv3 ITS is used, this should be programmed
+ * programmed. When ARM GICv3 ITS is used, this should be programmed
* with the address of the GITS_TRANSLATER register.
*/
IPROC_PCIE_MSI_ADDR_LO,
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index ecbb0fb3b653..38621558d397 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -700,7 +700,7 @@ EXPORT_SYMBOL_GPL(pci_epc_linkup);
/**
* pci_epc_init_notify() - Notify the EPF device that EPC device's core
* initialization is completed.
- * @epc: the EPC device whose core initialization is completeds
+ * @epc: the EPC device whose core initialization is completed
*
* Invoke to Notify the EPF device that the EPC device's initialization
* is completed.
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index 8aea16380870..9ed556936f48 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -224,7 +224,7 @@ EXPORT_SYMBOL_GPL(pci_epf_add_vepf);
* be removed
* @epf_vf: the virtual EP function to be removed
*
- * Invoke to remove a virtual endpoint function from the physcial endpoint
+ * Invoke to remove a virtual endpoint function from the physical endpoint
* function.
*/
void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
@@ -432,7 +432,7 @@ EXPORT_SYMBOL_GPL(pci_epf_destroy);
/**
* pci_epf_create() - create a new PCI EPF device
* @name: the name of the PCI EPF device. This name will be used to bind the
- * the EPF device to a EPF driver
+ * EPF device to a EPF driver
*
* Invoke to create a new PCI EPF device by providing the name of the function
* device.
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index f031302ad401..12f4b351be67 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -22,7 +22,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 1b26ca0b3701..ed7b58eb64d2 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -519,7 +519,7 @@ static struct pci_resource *do_bridge_resource_split(struct pci_resource **head,
* @head: list to search
* @size: size of node to find, must be a power of two.
*
- * Description: This function sorts the resource list by size and then returns
+ * Description: This function sorts the resource list by size and then
* returns the first node of "size" length that is not in the ISA aliasing
* window. If it finds a node larger than "size" it will split it up.
*/
@@ -1202,7 +1202,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
mdelay(5);
- /* Reenable interrupts */
+ /* Re-enable interrupts */
writel(0, ctrl->hpc_reg + INT_MASK);
pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
index e90a4ebf6550..0399c60d2ec1 100644
--- a/drivers/pci/hotplug/ibmphp.h
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -352,7 +352,7 @@ struct resource_node {
u32 len;
int type; /* MEM, IO, PFMEM */
u8 fromMem; /* this is to indicate that the range is from
- * from the Memory bucket rather than from PFMem */
+ * the Memory bucket rather than from PFMem */
struct resource_node *next;
struct resource_node *nextRange; /* for the other mem range on bus */
};
@@ -736,7 +736,7 @@ struct controller {
int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
int ibmphp_do_disable_slot(struct slot *slot_cur);
-int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */
+int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be static */
int ibmphp_configure_card(struct pci_func *, u8);
int ibmphp_unconfigure_card(struct slot **, int);
extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 9e3b27744305..bd7557ca4910 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -295,7 +295,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
mutex_lock(&slot->ctrl->cmd_lock);
if (!shpc_poll_ctrl_busy(ctrl)) {
- /* After 1 sec and and the controller is still busy */
+ /* After 1 sec and the controller is still busy */
ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
retval = -EBUSY;
goto out;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 2761ab86490d..df3bd7b40542 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -576,7 +576,7 @@ static int pci_pm_reenable_device(struct pci_dev *pci_dev)
{
int retval;
- /* if the device was enabled before suspend, reenable */
+ /* if the device was enabled before suspend, re-enable */
retval = pci_reenable_device(pci_dev);
/*
* if the device was busmaster before the suspend, make it busmaster
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9784fdcf3006..9fa1f97e5b27 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -57,7 +57,7 @@ struct aer_stats {
* "as seen by this device". Note that this may mean that if an
* end point is causing problems, the AER counters may increment
* at its link partner (e.g. root port) because the errors will be
- * "seen" by the link partner and not the the problematic end point
+ * "seen" by the link partner and not the problematic end point
* itself (which may report all counters as 0 as it never saw any
* problems).
*/
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4537d1ea14fd..881c5d7c3d02 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2700,7 +2700,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
* then the device can't use INTx interrupts. Tegra's PCIe root ports don't
* generate MSI interrupts for PME and AER events instead only INTx interrupts
* are generated. Though Tegra's PCIe root ports can generate MSI interrupts
- * for other events, since PCIe specificiation doesn't support using a mix of
+ * for other events, since PCIe specification doesn't support using a mix of
* INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port
* service drivers registering their respective ISRs for MSIs.
*/
--
2.33.0
