Re: [git pull] PCI fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/24/2011 05:00 PM, Jesse Barnes wrote:
> On Fri, 24 Jun 2011 15:56:42 -0700
> Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> wrote:
> 
>>
>>
>>
>> Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> wrote:
>>>
>>> How about a boot param?  We've done similar things for _CRS, and it
>>> might give Yinghai and Ram some more flexibility in improving our
>>> dynamic resource allocation before enabling it again (if ever).
>>
>> I'm OK with that, but then I'd suggest against the currently not yet merged series that doesn't seem to work anyway...
>>
>> IOW, just a simple patch that disables the resource re-allocation, and enables it with some command line option.
> 
> Ok sounds good, thanks.

please check the draft one,  not sure if you like
pci=try=2
or
pci=reallocate_bridge


[PATCH] pci: disable pci trying to reallocate pci bridge by default.

| PCI: update bridge resources to get more big ranges when allocating space (again)
|	da7822e5ad71ec9b745b412639f1e5e0ba795a20

still too risky and cause some systems have problem.

Disable reallocating feature, So other user could use command line enable it
to enable it with "pci=try=2"

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
 Documentation/kernel-parameters.txt |    6 ++++++
 drivers/pci/pci.c                   |    4 ++++
 drivers/pci/pci.h                   |    2 ++
 drivers/pci/setup-bus.c             |   15 +++++++++------
 4 files changed, 21 insertions(+), 6 deletions(-)

Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt
+++ linux-2.6/Documentation/kernel-parameters.txt
@@ -1980,6 +1980,12 @@ bytes respectively. Such letter suffixes
 				for broken drivers that don't call it.
 		skip_isa_align	[X86] do not align io start addr, so can
 				handle more pci cards
+		try=n		set the pci_try_num to reallocate the pci bridge resource
+				1: default
+				2: will set the num to max_depth, and try to reallocate res
+				   to get big range for the bridge. assume the pci peer root
+				   resource is right from _CRS or from hostbridge pci reg
+				   reading out.
 		firmware	[ARM] Do not re-enumerate the bus but instead
 				just use the configuration from the
 				bootloader. This is currently used on
Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -3485,6 +3485,10 @@ static int __init pci_setup(char *str)
 				pci_no_aer();
 			} else if (!strcmp(str, "nodomains")) {
 				pci_no_domains();
+			} else if (!strncmp(str, "try=", 4)) {
+				int try_num = memparse(str + 4, &str);
+				if (try_num > 0)
+					pci_try_num = try_num;
 			} else if (!strncmp(str, "cbiosize=", 9)) {
 				pci_cardbus_io_size = memparse(str + 9, &str);
 			} else if (!strncmp(str, "cbmemsize=", 10)) {
Index: linux-2.6/drivers/pci/pci.h
===================================================================
--- linux-2.6.orig/drivers/pci/pci.h
+++ linux-2.6/drivers/pci/pci.h
@@ -223,6 +223,8 @@ static inline int pci_ari_enabled(struct
 	return bus->self && bus->self->ari_enabled;
 }
 
+extern int pci_try_num;
+
 #ifdef CONFIG_PCI_QUIRKS
 extern int pci_is_reassigndev(struct pci_dev *dev);
 resource_size_t pci_specified_resource_alignment(struct pci_dev *dev);
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -1030,6 +1030,7 @@ static int __init pci_get_max_depth(void
  * second  and later try will clear small leaf bridge res
  * will stop till to the max  deepth if can not find good one
  */
+int pci_try_num = 1;
 void __init
 pci_assign_unassigned_resources(void)
 {
@@ -1042,16 +1043,18 @@ pci_assign_unassigned_resources(void)
 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
 				  IORESOURCE_PREFETCH;
 	unsigned long failed_type;
-	int max_depth = pci_get_max_depth();
-	int pci_try_num;
-
 
 	head.next = NULL;
 	add_list.next = NULL;
 
-	pci_try_num = max_depth + 1;
-	printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
-		 max_depth, pci_try_num);
+	if (pci_try_num > 1) {
+		int max_depth = pci_get_max_depth();
+
+		if (max_depth + 1 > pci_try_num)
+			pci_try_num = max_depth + 1;
+		printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+			max_depth, pci_try_num);
+	}
 
 again:
 	/* Depth first, calculate sizes and alignments of all
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux