Hi Zhou
Mant thanks for your review
On 2021/3/29 9:23, Zhou Wang wrote:
On 2021/3/27 18:47, Dongdong Liu wrote:
The hisilicon-pcie.txt file is no longer useful since commit
c2fa6cf76d20 (PCI: dwc: hisi: Remove non-ECAM HiSilicon
hip05/hip06 driver), so delete it.
No, it is no needed now. Thanks for removing this, and please
also remove related code in MAINTAINERS file :)
OK, Will do.
Thanks,
Dongdong
Best,
Zhou
Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
---
.../devicetree/bindings/pci/hisilicon-pcie.txt | 43 ----------------------
1 file changed, 43 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
deleted file mode 100644
index d6796ef..0000000
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-HiSilicon Hip05 and Hip06 PCIe host bridge DT description
-
-HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
-
-Additional properties are described here:
-
-Required properties
-- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
-- reg: Should contain rc_dbi, config registers location and length.
-- reg-names: Must include the following entries:
- "rc_dbi": controller configuration registers;
- "config": PCIe configuration space registers.
-- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
-- port-id: Should be 0, 1, 2 or 3.
-
-Optional properties:
-- status: Either "ok" or "disabled".
-- dma-coherent: Present if DMA operations are coherent.
-
-Hip05 Example (note that Hip06 is the same except compatible):
- pcie@b0080000 {
- compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
- reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
- reg-names = "rc_dbi", "config";
- bus-range = <0 15>;
- msi-parent = <&its_pcie>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
- num-lanes = <8>;
- port-id = <1>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
- 0x0 0 0 2 &mbigen_pcie 2 11
- 0x0 0 0 3 &mbigen_pcie 3 12
- 0x0 0 0 4 &mbigen_pcie 4 13>;
- };
.