Use helper function pcie_aer_is_native() in some places to keep the code tidy. No function changes. Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx> Reviewed-by: Krzysztof Wilczyński <kw@xxxxxxxxx> --- Changes from v1 to v2: - Add the fix suggested by Krzysztof. --- drivers/pci/pcie/aer.c | 4 ++-- drivers/pci/pcie/err.c | 2 +- drivers/pci/pcie/portdrv_core.c | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 77b0f2c..03212d0 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -1397,7 +1397,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev) */ aer = root ? root->aer_cap : 0; - if ((host->native_aer || pcie_ports_native) && aer) { + if (pcie_aer_is_native(dev) && aer) { /* Disable Root's interrupt in response to error messages */ pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, ®32); reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK; @@ -1417,7 +1417,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev) pci_info(dev, "Root Port link has been reset (%d)\n", rc); } - if ((host->native_aer || pcie_ports_native) && aer) { + if (pcie_aer_is_native(dev) && aer) { /* Clear Root Error Status */ pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, ®32); pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32); diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c index 510f31f..1d6cfb9 100644 --- a/drivers/pci/pcie/err.c +++ b/drivers/pci/pcie/err.c @@ -237,7 +237,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev, * this status. In that case, the signaling device may not even be * visible to the OS. */ - if (host->native_aer || pcie_ports_native) { + if (pcie_aer_is_native(dev)) { pcie_clear_device_status(bridge); pci_aer_clear_nonfatal_status(bridge); } diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index e1fed664..3b3743e 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -221,8 +221,7 @@ static int get_port_device_capability(struct pci_dev *dev) } #ifdef CONFIG_PCIEAER - if (dev->aer_cap && pci_aer_available() && - (pcie_ports_native || host->native_aer)) { + if (pci_aer_available() && pcie_aer_is_native(dev)) { services |= PCIE_PORT_SERVICE_AER; /* -- 2.8.1