Per Downstream Port Containment Related Enhancements ECN[1],
Table 4-6 Interpretation of _OSC Control Field Returned Value,
for bit 7 of _OSC control return value:
"If firmware allows the OS control of this feature, then,
in the context of the _OSC method the OS must ensure that
Downstream Port Containment ERR_COR signaling is disabled
as described in the PCI Express Base Specification."
and PCI Express Base Specification Revision 4.0 Version 1.0
section 6.2.10.2, Use of DPC ERR_COR Signaling:
"...DPC ERR_COR signaling is primarily intended for use by
platform firmware..."
Currently we don't set DPC ERR_COR enable bit, but explicitly
clear the bit to ensure it's disabled.
[1] Downstream Port Containment Related Enhancements ECN,
Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
Signed-off-by: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
---
drivers/pci/pcie/dpc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index e05aba8..5cc8ef3 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -302,7 +302,7 @@ static int dpc_probe(struct pcie_device *dev)
pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
- ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
+ ctl = (ctl & 0xffe4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
pci_info(pdev, "enabled with IRQ %d\n", dev->irq);
--
2.8.1
