The number of functions supported by the endpoint controller is
configured in LM_EP_FUNC_CFG based on func_no member of struct pci_epf.
Now that an endpoint function can be associated with two endpoint
controllers (primary and secondary), just using func_no will
not suffice as that will take into account only if the endpoint
controller is associated with the primary interface of endpoint
function. Instead use epc->function_num_map which will already have the
configured functions information (irrespective of whether the endpoint
controller is associated with primary or secondary interface).
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Reviewed-by: Tom Joseph <tjoseph@xxxxxxxxxxx>
---
drivers/pci/controller/cadence/pcie-cadence-ep.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index dc88078194cb..897cdde02bd8 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -506,18 +506,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
struct cdns_pcie *pcie = &ep->pcie;
struct device *dev = pcie->dev;
- struct pci_epf *epf;
- u32 cfg;
int ret;
/*
* BIT(0) is hardwired to 1, hence function 0 is always enabled
* and can't be disabled anyway.
*/
- cfg = BIT(0);
- list_for_each_entry(epf, &epc->pci_epf, list)
- cfg |= BIT(epf->func_no);
- cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg);
+ cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map);
ret = cdns_pcie_start_link(pcie);
if (ret) {
--
2.17.1
