[PATCH v11 00/17] Implement NTB Controller using multiple PCI EP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series is about implementing SW defined Non-Transparent Bridge (NTB)
using multiple endpoint (EP) instances. This series has been tested using
2 endpoint instances in J7 connected to J7 board on one end and DRA7 board
on the other end. However there is nothing platform specific for the NTB
functionality.

This was presented in Linux Plumbers Conference. Link to presentation
and video can be found @ [1]
Created a video demo @ [9]

RFC patch series can be found @ [2]
v1 patch series can be found @ [3]
v2 patch series can be found @ [4]
v3 patch series can be found @ [5]
v4 patch series can be found @ [6]
v5 patch series can be found @ [7]
v6 patch series can be found @ [8]
v7 patch series can be found @ [10]
v8 patch series can be found @ [11]
v9 patch series can be found @ [12]
v10 patch series can be found @ [13]

Changes from v10:
1) Squashed a patch which explains  NTB in PCI_EPF_NTB help text.

Changes from v9:
1) Fix the typos pointed out Bjorn Helgaas
2) Added the received Reviewed-by tags.

Changes from v8:
1) Do not use devm_request_irq/devm_free_irq as pci_free_irq_vectors()
has to be used after free_irq
2) Drop "NTB: tool: Enable the NTB/PCIe link on the local or remote side
of bridge" as there is a debugfs entry to enable the link
 
Changes from v7:
1) Used values stored in ctrl_reg_bar, peer_spad_reg_bar and db_reg_bar
   instead of hardcoded values in pci_iomap of ntb_hw_epf.c driver

Changes from v6:
1) Fixed issues when multiple NTB devices are creating using multiple
   functions
2) Fixed issue with writing scratchpad register
3) Created a video demo @ [9]

Changes from v5:
1) Fixed a formatting issue in Kconfig pointed out by Randy
2) Checked for Error or Null in pci_epc_add_epf()

Changes from v4:
1) Fixed error condition checks in pci_epc_add_epf()

Changes from v3:
1) Fixed Documentation edits suggested by Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

Changes from v2:
1) Add support for the user to create sub-directory of 'EPF Device'
   directory (for endpoint function specific configuration using
   configfs).
2) Add documentation for NTB specific attributes in configfs
3) Check for PCI_CLASS_MEMORY_RAM (PCIe class) before binding ntb_hw_epf
   driver
4) Other documentation fixes

Changes from v1:
1) As per Rob's comment, removed support for creating NTB function
   device from DT
2) Add support to create NTB EPF device using configfs (added support in
   configfs to associate primary and secondary EPC with EPF.

Changes from RFC:
1) Converted the DT binding patches to YAML schema and merged the
   DT binding patches together
2) NTB documentation is converted to .rst
3) One HOST can now interrupt the other HOST using MSI-X interrupts
4) Added support for teardown of memory window and doorbell
   configuration
5) Add support to provide support 64-bit memory window size from
   DT

[1] -> https://linuxplumbersconf.org/event/4/contributions/395/
[2] -> http://lore.kernel.org/r/20190926112933.8922-1-kishon@xxxxxx
[3] -> http://lore.kernel.org/r/20200514145927.17555-1-kishon@xxxxxx
[4] -> http://lore.kernel.org/r/20200611130525.22746-1-kishon@xxxxxx
[5] -> http://lore.kernel.org/r/20200904075052.8911-1-kishon@xxxxxx
[6] -> http://lore.kernel.org/r/20200915042110.3015-1-kishon@xxxxxx
[7] -> http://lore.kernel.org/r/20200918064227.1463-1-kishon@xxxxxx
[8] -> http://lore.kernel.org/r/20200924092519.17082-1-kishon@xxxxxx
[9] -> https://youtu.be/dLKKxrg5-rY
[10] -> http://lore.kernel.org/r/20200930153519.7282-1-kishon@xxxxxx 
[11] -> http://lore.kernel.org/r/20201111153559.19050-1-kishon@xxxxxx
[12] -> http://lore.kernel.org/r/20210104152909.22038-1-kishon@xxxxxx
[13] -> http://lore.kernel.org/r/20210129124313.28549-1-kishon@xxxxxx

Kishon Vijay Abraham I (17):
  Documentation: PCI: Add specification for the *PCI NTB* function
    device
  PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit
    BAR
  PCI: endpoint: Add helper API to get the 'next' unreserved BAR
  PCI: endpoint: Make *_free_bar() to return error codes on failure
  PCI: endpoint: Remove unused pci_epf_match_device()
  PCI: endpoint: Add support to associate secondary EPC with EPF
  PCI: endpoint: Add support in configfs to associate two EPCs with EPF
  PCI: endpoint: Add pci_epc_ops to map MSI irq
  PCI: endpoint: Add pci_epf_ops for epf drivers to expose function
    specific attrs
  PCI: endpoint: Allow user to create sub-directory of 'EPF Device'
    directory
  PCI: cadence: Implement ->msi_map_irq() ops
  PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map
  PCI: endpoint: Add EP function driver to provide NTB functionality
  PCI: Add TI J721E device to pci ids
  NTB: Add support for EPF PCI-Express Non-Transparent Bridge
  Documentation: PCI: Add configfs binding documentation for pci-ntb
    endpoint function
  Documentation: PCI: Add userguide for PCI endpoint NTB function

 .../PCI/endpoint/function/binding/pci-ntb.rst |   38 +
 Documentation/PCI/endpoint/index.rst          |    3 +
 .../PCI/endpoint/pci-endpoint-cfs.rst         |   10 +
 .../PCI/endpoint/pci-ntb-function.rst         |  348 +++
 Documentation/PCI/endpoint/pci-ntb-howto.rst  |  161 ++
 drivers/misc/pci_endpoint_test.c              |    1 -
 drivers/ntb/hw/Kconfig                        |    1 +
 drivers/ntb/hw/Makefile                       |    1 +
 drivers/ntb/hw/epf/Kconfig                    |    6 +
 drivers/ntb/hw/epf/Makefile                   |    1 +
 drivers/ntb/hw/epf/ntb_hw_epf.c               |  754 ++++++
 .../pci/controller/cadence/pcie-cadence-ep.c  |   60 +-
 drivers/pci/endpoint/functions/Kconfig        |   13 +
 drivers/pci/endpoint/functions/Makefile       |    1 +
 drivers/pci/endpoint/functions/pci-epf-ntb.c  | 2128 +++++++++++++++++
 drivers/pci/endpoint/functions/pci-epf-test.c |   13 +-
 drivers/pci/endpoint/pci-ep-cfs.c             |  176 +-
 drivers/pci/endpoint/pci-epc-core.c           |  130 +-
 drivers/pci/endpoint/pci-epf-core.c           |  105 +-
 include/linux/pci-epc.h                       |   39 +-
 include/linux/pci-epf.h                       |   28 +-
 include/linux/pci_ids.h                       |    1 +
 22 files changed, 3945 insertions(+), 73 deletions(-)
 create mode 100644 Documentation/PCI/endpoint/function/binding/pci-ntb.rst
 create mode 100644 Documentation/PCI/endpoint/pci-ntb-function.rst
 create mode 100644 Documentation/PCI/endpoint/pci-ntb-howto.rst
 create mode 100644 drivers/ntb/hw/epf/Kconfig
 create mode 100644 drivers/ntb/hw/epf/Makefile
 create mode 100644 drivers/ntb/hw/epf/ntb_hw_epf.c
 create mode 100644 drivers/pci/endpoint/functions/pci-epf-ntb.c

-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux