While the change only seemed to have caused issue on uas drives, we
probably want to avoid it in the usb-storage driver as well, until
we are sure it is the right thing to do.
Signed-off-by: Tom Yan <tom.ty89@xxxxxxxxx>
---
drivers/usb/storage/scsiglue.c | 40 +++++++++++++++++-----------------
drivers/usb/storage/usb.c | 3 +--
2 files changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 560efd1479ba..6539bae1c188 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -92,7 +92,7 @@ static int slave_alloc (struct scsi_device *sdev)
static int slave_configure(struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
- struct device *dev = sdev->host->dma_dev;
+ struct device *dev = us->pusb_dev->bus->sysdev;
/*
* Many devices have trouble transferring more than 32KB at a time,
@@ -120,6 +120,25 @@ static int slave_configure(struct scsi_device *sdev)
* better throughput on most devices.
*/
blk_queue_max_hw_sectors(sdev->request_queue, 2048);
+ } else {
+ /*
+ * Limit the total size of a transfer to 120 KB.
+ *
+ * Some devices are known to choke with anything larger. It seems like
+ * the problem stems from the fact that original IDE controllers had
+ * only an 8-bit register to hold the number of sectors in one transfer
+ * and even those couldn't handle a full 256 sectors.
+ *
+ * Because we want to make sure we interoperate with as many devices as
+ * possible, we will maintain a 240 sector transfer size limit for USB
+ * Mass Storage devices.
+ *
+ * Tests show that other operating have similar limits with Microsoft
+ * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
+ * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
+ * and 2048 for USB3 devices.
+ */
+ blk_queue_max_hw_sectors(sdev->request_queue, 240);
}
/*
@@ -627,25 +646,6 @@ static const struct scsi_host_template usb_stor_host_template = {
.sg_tablesize = SG_MAX_SEGMENTS,
- /*
- * Limit the total size of a transfer to 120 KB.
- *
- * Some devices are known to choke with anything larger. It seems like
- * the problem stems from the fact that original IDE controllers had
- * only an 8-bit register to hold the number of sectors in one transfer
- * and even those couldn't handle a full 256 sectors.
- *
- * Because we want to make sure we interoperate with as many devices as
- * possible, we will maintain a 240 sector transfer size limit for USB
- * Mass Storage devices.
- *
- * Tests show that other operating have similar limits with Microsoft
- * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
- * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
- * and 2048 for USB3 devices.
- */
- .max_sectors = 240,
-
/* emulated HBA */
.emulated = 1,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c2ef367cf257..f177da4ff1bc 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1050,8 +1050,7 @@ int usb_stor_probe2(struct us_data *us)
usb_autopm_get_interface_no_resume(us->pusb_intf);
snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
dev_name(dev));
- result = scsi_add_host_with_dma(us_to_host(us), dev,
- us->pusb_dev->bus->sysdev);
+ result = scsi_add_host(us_to_host(us), dev);
if (result) {
dev_warn(dev,
"Unable to add the scsi host\n");
--
2.29.2
