Kenji Kaneshige wrote: > Yinghai Lu wrote: >> Kenji Kaneshige wrote: >>> My system doesn't boot (hangup) with the following error messages >>> from Fusion MPT SAS driver. Those are different from the one >>> captured with the previous version of your patches. >>> >>> >>> Fusion MPT SAS Host driver 3.04.12 >>> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>> mptbase: ioc0: Initiating bringup >>> mptbase: ioc0: WARNING - Unexpected doorbell active! >>> mptbase: ioc0: ERROR - Failed to come READY after reset! >>> IocState=f0000000 >>> mptbase: ioc0: WARNING - ResetHistory bit failed to clear! >>> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh) >>> mptbase: ioc0: WARNING - NOT READY WARNING! >>> mptbase: ioc0: ERROR - didn't initialize properly! (-1) >>> mptsas: probe of 0000:09:00.0 failed with error -1 >>> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >>> mptbase: ioc1: Initiating bringup >>> mptbase: ioc1: WARNING - Unexpected doorbell active! >>> mptbase: ioc1: ERROR - Failed to come READY after reset! >>> IocState=f0000000 >>> mptbase: ioc1: WARNING - ResetHistory bit failed to clear! >>> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh) >>> mptbase: ioc1: WARNING - NOT READY WARNING! >>> mptbase: ioc1: ERROR - didn't initialize properly! (-1) >>> mptsas: probe of 0000:0a:00.0 failed with error -1 >>> >>> >>> I'll send the whole boot log privately. >> >> thanks, at the same time please try "debug pci=try=1" >> > > I confirmed system boot up without errors by "pci=try=1". > I'll capture the bootlog with "debug" option and send it > to you soon. thanks. please send one only have "debug" only. Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
