Kenji Kaneshige wrote: > My system doesn't boot (hangup) with the following error messages > from Fusion MPT SAS driver. Those are different from the one > captured with the previous version of your patches. > > > Fusion MPT SAS Host driver 3.04.12 > mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > mptbase: ioc0: Initiating bringup > mptbase: ioc0: WARNING - Unexpected doorbell active! > mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=f0000000 > mptbase: ioc0: WARNING - ResetHistory bit failed to clear! > mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh) > mptbase: ioc0: WARNING - NOT READY WARNING! > mptbase: ioc0: ERROR - didn't initialize properly! (-1) > mptsas: probe of 0000:09:00.0 failed with error -1 > mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > mptbase: ioc1: Initiating bringup > mptbase: ioc1: WARNING - Unexpected doorbell active! > mptbase: ioc1: ERROR - Failed to come READY after reset! IocState=f0000000 > mptbase: ioc1: WARNING - ResetHistory bit failed to clear! > mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh) > mptbase: ioc1: WARNING - NOT READY WARNING! > mptbase: ioc1: ERROR - didn't initialize properly! (-1) > mptsas: probe of 0000:0a:00.0 failed with error -1 > > > I'll send the whole boot log privately. thanks, at the same time please try "debug pci=try=1" Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
