This patch changes shpchp_configure_device() to use the
generic pci_configure_slot() rather than the SHPC-specific
program_fw_provided_values().
Unlike the previous SHPC-specific code, pci_configure_slot()
programs PCI Express devices with Type 2 (PCI Express) settings
if provided by an _HPX method. (I don't know whether it even
makes sense to have a PCI Express device managed by an SHPC).
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Reviewed-by: Alex Chiang <achiang@xxxxxx>
---
drivers/pci/hotplug/shpchp.h | 7 ----
drivers/pci/hotplug/shpchp_pci.c | 62 +-------------------------------------
2 files changed, 1 insertions(+), 68 deletions(-)
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 49bd2d7..bd588eb 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -188,19 +188,12 @@ static inline const char *slot_name(struct slot *slot)
#ifdef CONFIG_ACPI
#include <linux/pci-acpi.h>
-static inline int get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
-{
- return acpi_get_hp_params(dev, hpp);
-}
-
static inline int get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
u32 flags = OSC_SHPC_NATIVE_HP_CONTROL;
return acpi_get_hp_hw_control_from_firmware(dev, flags);
}
#else
-#define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
#define get_hp_hw_control_from_firmware(dev) (0)
#endif
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index aa315e5..8c3d321 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -34,66 +34,6 @@
#include "../pci.h"
#include "shpchp.h"
-static void program_fw_provided_values(struct pci_dev *dev)
-{
- u16 pci_cmd, pci_bctl;
- struct pci_dev *cdev;
- struct hotplug_params hpp;
-
- /* Program hpp values for this device */
- if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
- (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
- return;
-
- /* use default values if we can't get them from firmware */
- if (get_hp_params_from_firmware(dev, &hpp) ||
- !hpp.t0 || (hpp.t0->revision > 1)) {
- warn("Could not get hotplug parameters. Use defaults\n");
- hpp.t0 = &hpp.type0_data;
- hpp.t0->revision = 0;
- hpp.t0->cache_line_size = 8;
- hpp.t0->latency_timer = 0x40;
- hpp.t0->enable_serr = 0;
- hpp.t0->enable_perr = 0;
- }
-
- pci_write_config_byte(dev,
- PCI_CACHE_LINE_SIZE, hpp.t0->cache_line_size);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.t0->latency_timer);
- pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
- if (hpp.t0->enable_serr)
- pci_cmd |= PCI_COMMAND_SERR;
- else
- pci_cmd &= ~PCI_COMMAND_SERR;
- if (hpp.t0->enable_perr)
- pci_cmd |= PCI_COMMAND_PARITY;
- else
- pci_cmd &= ~PCI_COMMAND_PARITY;
- pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
-
- /* Program bridge control value and child devices */
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
- hpp.t0->latency_timer);
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
- if (hpp.t0->enable_serr)
- pci_bctl |= PCI_BRIDGE_CTL_SERR;
- else
- pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
- if (hpp.t0->enable_perr)
- pci_bctl |= PCI_BRIDGE_CTL_PARITY;
- else
- pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
- if (dev->subordinate) {
- list_for_each_entry(cdev, &dev->subordinate->devices,
- bus_list)
- program_fw_provided_values(cdev);
- }
- }
-}
-
int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
@@ -153,7 +93,7 @@ int __ref shpchp_configure_device(struct slot *p_slot)
child->subordinate = pci_do_scan_bus(child);
pci_bus_size_bridges(child);
}
- program_fw_provided_values(dev);
+ pci_configure_slot(dev);
pci_dev_put(dev);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
