We always look up hotplug_params with decode_hpp() immediately before using
them, so we don't need to save them in the acpiphp_bridge struct. This
patch follows the example of program_fw_provided_values() in pciehp_pci.c
and shpchp_pci.c by just keeping the params on the stack while we need them.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Reviewed-by: Alex Chiang <achiang@xxxxxx>
---
drivers/pci/hotplug/acpiphp.h | 3 --
drivers/pci/hotplug/acpiphp_glue.c | 58 +++++++++++++++++-------------------
2 files changed, 27 insertions(+), 34 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index e68d5f2..7d938df 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -91,9 +91,6 @@ struct acpiphp_bridge {
/* PCI-to-PCI bridge device */
struct pci_dev *pci_dev;
- /* ACPI 2.0 _HPP parameters */
- struct hotplug_params hpp;
-
spinlock_t res_lock;
};
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index d2f4ce1..1eec666 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(ioapic_list_lock);
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
static void acpiphp_sanitize_bus(struct pci_bus *bus);
-static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
+static void acpiphp_set_hpp_values(struct pci_bus *bus);
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
/* callback routine to check for the existence of a pci dock device */
@@ -276,23 +276,23 @@ static int detect_ejectable_slots(struct pci_bus *pbus)
/* decode ACPI 2.0 _HPP hot plug parameters */
-static void decode_hpp(struct acpiphp_bridge *bridge)
+static void decode_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
{
acpi_status status;
- status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp);
+ status = acpi_get_hp_params_from_firmware(dev->bus, hpp);
if (ACPI_FAILURE(status) ||
- !bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) {
+ !hpp->t0 || (hpp->t0->revision > 1)) {
/* use default numbers */
printk(KERN_WARNING
"%s: Could not get hotplug parameters. Use defaults\n",
__func__);
- bridge->hpp.t0 = &bridge->hpp.type0_data;
- bridge->hpp.t0->revision = 0;
- bridge->hpp.t0->cache_line_size = 0x10;
- bridge->hpp.t0->latency_timer = 0x40;
- bridge->hpp.t0->enable_serr = 0;
- bridge->hpp.t0->enable_perr = 0;
+ hpp->t0 = &hpp->type0_data;
+ hpp->t0->revision = 0;
+ hpp->t0->cache_line_size = 0x10;
+ hpp->t0->latency_timer = 0x40;
+ hpp->t0->enable_serr = 0;
+ hpp->t0->enable_perr = 0;
}
}
@@ -1080,7 +1080,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
- acpiphp_set_hpp_values(slot->bridge->handle, bus);
+ acpiphp_set_hpp_values(bus);
list_for_each_entry(func, &slot->funcs, sibling)
acpiphp_configure_ioapics(func->handle);
pci_enable_bridges(bus);
@@ -1291,7 +1291,7 @@ static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
return retval;
}
-static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
+static void program_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
{
u16 pci_cmd, pci_bctl;
struct pci_dev *cdev;
@@ -1306,15 +1306,15 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
return;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- bridge->hpp.t0->cache_line_size);
+ hpp->t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
- bridge->hpp.t0->latency_timer);
+ hpp->t0->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
- if (bridge->hpp.t0->enable_serr)
+ if (hpp->t0->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
- if (bridge->hpp.t0->enable_perr)
+ if (hpp->t0->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
@@ -1323,13 +1323,13 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
/* Program bridge control value and child devices */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
- bridge->hpp.t0->latency_timer);
+ hpp->t0->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
- if (bridge->hpp.t0->enable_serr)
+ if (hpp->t0->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
- if (bridge->hpp.t0->enable_perr)
+ if (hpp->t0->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
@@ -1337,24 +1337,20 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
if (dev->subordinate) {
list_for_each_entry(cdev, &dev->subordinate->devices,
bus_list)
- program_hpp(cdev, bridge);
+ program_hpp(cdev, hpp);
}
}
}
-static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
+static void acpiphp_set_hpp_values(struct pci_bus *bus)
{
- struct acpiphp_bridge bridge;
struct pci_dev *dev;
+ struct hotplug_params hpp;
- memset(&bridge, 0, sizeof(bridge));
- bridge.handle = handle;
- bridge.pci_bus = bus;
- bridge.pci_dev = bus->self;
- decode_hpp(&bridge);
- list_for_each_entry(dev, &bus->devices, bus_list)
- program_hpp(dev, &bridge);
-
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ decode_hpp(dev, &hpp);
+ program_hpp(dev, &hpp);
+ }
}
/*
@@ -1398,7 +1394,7 @@ static int acpiphp_configure_bridge (acpi_handle handle)
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
- acpiphp_set_hpp_values(handle, bus);
+ acpiphp_set_hpp_values(bus);
pci_enable_bridges(bus);
acpiphp_configure_ioapics(handle);
pci_dev_put(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
