[PATCH] pciaer: report config read/write errors

[Stephen Hemminger <shemminger@xxxxxxxxxx>]

This patch does more error checking in the Advanced Error Reporting code.
Since AER needs to access PCI registers > 255, it won't work without MMCONFIG
and other quirks may stop it as well. The code must check this by looking
at return values from pci_read/write_config_XXX calls.  

I don't have any hardware that uses AER routines but discovered this 
in earlier versions of the sky2 driver that tried to use
pci AER routines. Ended up just giving up and using other ways to access PCI
config space on sky2 since there were too many platform glitches.


Signed-off-by: Stephen Hemminger <shemminger@xxxxxxxxxx>


--- a/drivers/pci/pcie/aer/aerdrv_core.c	2008-12-02 07:56:08.000000000 -0800
+++ b/drivers/pci/pcie/aer/aerdrv_core.c	2008-12-02 09:07:32.000000000 -0800
@@ -31,80 +31,92 @@ module_param(forceload, bool, 0);
 int pci_enable_pcie_error_reporting(struct pci_dev *dev)
 {
 	u16 reg16 = 0;
-	int pos;
+	int pos, err;
+	u32 status;
 
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 	if (!pos)
 		return -EIO;
 
+	err = pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+	if (err)
+		return err;
+
 	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (!pos)
 		return -EIO;
 
-	pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
+	err = pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
+	if (err)
+		return err;
+
 	reg16 = reg16 |
 		PCI_EXP_DEVCTL_CERE |
 		PCI_EXP_DEVCTL_NFERE |
 		PCI_EXP_DEVCTL_FERE |
 		PCI_EXP_DEVCTL_URRE;
-	pci_write_config_word(dev, pos+PCI_EXP_DEVCTL,
-			reg16);
-	return 0;
+	return pci_write_config_word(dev, pos+PCI_EXP_DEVCTL, reg16);
 }
 
 int pci_disable_pcie_error_reporting(struct pci_dev *dev)
 {
 	u16 reg16 = 0;
-	int pos;
+	int pos, err;
 
 	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (!pos)
 		return -EIO;
 
-	pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
+	err = pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, &reg16);
+	if (err)
+		return err;
+
 	reg16 = reg16 & ~(PCI_EXP_DEVCTL_CERE |
 			PCI_EXP_DEVCTL_NFERE |
 			PCI_EXP_DEVCTL_FERE |
 			PCI_EXP_DEVCTL_URRE);
-	pci_write_config_word(dev, pos+PCI_EXP_DEVCTL,
-			reg16);
-	return 0;
+	return pci_write_config_word(dev, pos+PCI_EXP_DEVCTL, reg16);
 }
 
 int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 {
-	int pos;
+	int pos, err;
 	u32 status, mask;
 
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 	if (!pos)
 		return -EIO;
 
-	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
-	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+	err = pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+	if (err)
+		return err;
+
+	err = pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+	if (err)
+		return err;
+
 	if (dev->error_state == pci_channel_io_normal)
 		status &= ~mask; /* Clear corresponding nonfatal bits */
 	else
 		status &= mask; /* Clear corresponding fatal bits */
-	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
-
-	return 0;
+	return pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
 }
 
 #if 0
 int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
 {
-	int pos;
+	int pos, err;
 	u32 status;
 
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 	if (!pos)
 		return -EIO;
 
-	pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
-	pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
+	err = pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
+	if (err)
+		return err;
 
-	return 0;
+	return pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
 }
 #endif  /*  0  */
 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html