Re: [PATCH] PCI probing debug message uniformization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 3, 2008 at 8:57 PM, Bjorn Helgaas <bjorn.helgaas@xxxxxx> wrote:
> It'll be easier for Jesse if you include the proper changelog again
> with just a 1-2 line sample of the changed messages.  BTW, the "--"
> before your sig confused my mailer into not quoting the patch itself,
> hence the screwed up formatting below.

The "-- " line is the start-of-.sig marker have I been taught in my
school days, I think they then spoke about netiquette...

> dev_info() is exactly equivalent to dev_printk(KERN_INFO).  I usually
> use dev_info(), though I'm a bit ambivalent because it's nice to be
> able to grep for "printk".

I left dev_printk(KERN_INFO, ...) for grepability

> Anyway, maybe you can correct the grammar
> of "enabled forcedly" to something like "you can enable with ..." when
> you re-post with the changelog.

I've used "You can enable it back with", hoping the gramar is right

> (Note that dev_dbg() is NOT exactly equivalent to dev_printk(KERN_DEBUG),
> so you can't change all of them.  dev_printk(KERN_DEBUG) is always
> compiled in, while dev_dbg() is only compiled in when "DEBUG" is defined.)

Thanks for the hint, for I may have jumped the gun on those "other" cleanups
;-)

So here is the new version cut'n'pasted from git-format-patch

######################### CUT HERE #####################

>From 6250265aded9adcc2bdd5f62977c02a936b641f0 Mon Sep 17 00:00:00 2001
From: Vincent Legoll <vincent.legoll@xxxxxxxxx>
Date: Fri, 3 Oct 2008 23:56:02 +0200
Subject: [PATCH] PCI probing debug message uniformization

This patch uniformizes PCI probing debug boot messages
with dev_printk() intead of manual printk()

It changes adress range output from [%llx, %llx] to
[%#llx-%#llx], like in pci_request_region().

For example, it goes from the mixed-style:

PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4280000, f4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

to uniform:

pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4280000-0xf4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

This patch has been runtime tested, boot log messages diffed,
everything looks OK.

Signed-off-by: Vincent Legoll <vincent.legoll@xxxxxxxxx>
---
 drivers/pci/pcie/aspm.c |    6 +++---
 drivers/pci/probe.c     |   21 +++++++++++----------
 2 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 851f5b8..fa0d1a4 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -528,9 +528,9 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 		pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
 			&reg32);
 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
-			printk("Pre-1.1 PCIe device detected, "
-				"disable ASPM for %s. It can be enabled forcedly"
-				" with 'pcie_aspm=force'\n", pci_name(pdev));
+			dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM"
+				" on pre-1.1 PCIe device. You can enable it"
+				" back with 'pcie_aspm=force'\n");
 			return -EINVAL;
 		}
 	}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 36698e5..0ae65bf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -304,8 +304,9 @@ static int __pci_read_base(struct pci_dev *dev,
enum pci_bar_type type,
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
-			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
-				pci_name(dev), pos, (unsigned long long)res->start,
+			dev_printk(KERN_DEBUG, &dev->dev,
+				"reg %x 64bit mmio: [%#llx-%#llx]\n", pos,
+				(unsigned long long)res->start,
 				(unsigned long long)res->end);
 		}
 	} else {
@@ -316,8 +317,8 @@ static int __pci_read_base(struct pci_dev *dev,
enum pci_bar_type type,

 		res->start = l;
 		res->end = l + sz;
-		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
-			pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+		dev_printk(KERN_DEBUG, &dev->dev, "reg %x %s: [%#llx-%#llx]\n", pos,
+			(res->flags & IORESOURCE_IO) ? "io port" : "32bit mmio",
 			(unsigned long long)res->start, (unsigned long long)res->end);
 	}

@@ -389,8 +390,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
-			pci_name(dev), (unsigned long long) res->start,
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge io port: [%#llx-%#llx]\n",
+			(unsigned long long) res->start,
 			(unsigned long long) res->end);
 	}

@@ -403,8 +404,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
-			pci_name(dev), (unsigned long long) res->start,
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge 32bit mmio: [%#llx-%#llx]\n",
+			(unsigned long long) res->start,
 			(unsigned long long) res->end);
 	}

@@ -441,8 +442,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
-			pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: [%#llx-%#llx]\n",
+			(res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
 			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
 }
-- 
1.6.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux