[PATCH] drivers: Follow the indentation coding standard on printks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix indentation of printks that start at the beginning of the line. Change this 
for the right number of space characters, or tabs if the file uses them. 

Signed-off-by: Carlos Bilbao <bilbao@xxxxxx>
---
 drivers/atm/eni.c                      | 2 +-
 drivers/atm/iphase.c                   | 2 +-
 drivers/atm/suni.c                     | 4 ++--
 drivers/atm/zatm.c                     | 8 ++++----
 drivers/net/ethernet/dec/tulip/de4x5.c | 2 +-
 drivers/net/sb1000.c                   | 4 ++--
 drivers/parisc/iosapic.c               | 4 ++--
 drivers/parisc/sba_iommu.c             | 2 +-
 8 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 422753d52244..6d10fd62ba7e 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1456,7 +1456,7 @@ static int start_tx(struct atm_dev *dev)
 
 static void foo(void)
 {
-printk(KERN_INFO
+  printk(KERN_INFO
   "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n"
   "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n",
   tx_complete,dma_complete,queued,requeued,submitted,backlogged,
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index bc8e8d9f176b..65bb700cd5af 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1246,7 +1246,7 @@ static void rx_intr(struct atm_dev *dev)
                ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {
         for (i = 1; i <= iadev->num_rx_desc; i++)
                free_desc(dev, i);
-printk("Test logic RUN!!!!\n");
+        printk("Test logic RUN!!!!\n");
         writew( ~(RX_FREEQ_EMPT|RX_EXCP_RCVD),iadev->reass_reg+REASS_MASK_REG);
         iadev->rxing = 1;
      }
diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c
index 21e5acc766b8..149605cdb859 100644
--- a/drivers/atm/suni.c
+++ b/drivers/atm/suni.c
@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)
 		timer_setup(&poll_timer, suni_hz, 0);
 		poll_timer.expires = jiffies+HZ;
 #if 0
-printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev,
-    (unsigned long) poll_timer.list.next);
+	printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev,
+	    (unsigned long) poll_timer.list.next);
 #endif
 		add_timer(&poll_timer);
 	}
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index cf5fffcf98a1..4fb89ed47311 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -380,7 +380,7 @@ static void poll_rx(struct atm_dev *dev,int mbx)
 			pos = zatm_dev->mbx_start[mbx];
 		cells = here[0] & uPD98401_AAL5_SIZE;
 #if 0
-printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
+		printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
 {
 unsigned long *x;
 		printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
@@ -403,14 +403,14 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >>
 		skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;
 		__net_timestamp(skb);
 #if 0
-printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
+		printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
   ((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1],
   ((unsigned *) skb->data)[0]);
 #endif
 		EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb,
 		    (unsigned long) here);
 #if 0
-printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
+		printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
 #endif
 		size = error ? 0 : ntohs(((__be16 *) skb->data)[cells*
 		    ATM_CELL_PAYLOAD/sizeof(u16)-3]);
@@ -664,7 +664,7 @@ static int do_tx(struct sk_buff *skb)
 		EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0);
 	}
 	else {
-printk("NONONONOO!!!!\n");
+		printk("NONONONOO!!!!\n");
 		dsc = NULL;
 #if 0
 		u32 *put;
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index b125d7faefdf..155cfe8800cd 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -3169,7 +3169,7 @@ dc2114x_autoconf(struct net_device *dev)
 
     default:
 	lp->tcount++;
-printk("Huh?: media:%02x\n", lp->media);
+	printk("Huh?: media:%02x\n", lp->media);
 	lp->media = INIT;
 	break;
     }
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index e88af978f63c..54a7c7613434 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -760,7 +760,7 @@ sb1000_rx(struct net_device *dev)
 
 	insw(ioaddr, (unsigned short*) st, 1);
 #ifdef XXXDEBUG
-printk("cm0: received: %02x %02x\n", st[0], st[1]);
+	printk("cm0: received: %02x %02x\n", st[0], st[1]);
 #endif /* XXXDEBUG */
 	lp->rx_frames++;
 
@@ -805,7 +805,7 @@ printk("cm0: received: %02x %02x\n", st[0], st[1]);
 		/* get data length */
 		insw(ioaddr, buffer, NewDatagramHeaderSize / 2);
 #ifdef XXXDEBUG
-printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]);
+		printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]);
 #endif /* XXXDEBUG */
 		if (buffer[0] != NewDatagramHeaderSkip) {
 			if (sb1000_debug > 1)
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 8a3b0c3a1e92..5d27c23e6429 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)
 	printk("\n");
 }
 
-printk("iosapic_enable_irq(): sel ");
+	printk("iosapic_enable_irq(): sel ");
 {
 	struct iosapic_info *isp = vi->iosapic;
 
@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel ");
 		printk(" %x", d1);
 	}
 }
-printk("\n");
+	printk("\n");
 #endif
 
 	/*
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index dce4cdf786cd..c3381facdfc5 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)
 
 
 #if 0
-printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
+	printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
 	PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
 
 	/*
-- 
2.25.1






[Index of Archives]     [Linux SoC]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux