On 2017-12-03, at 3:21 PM, Helge Deller wrote: > On 03.12.2017 17:54, John David Anglin wrote: >> Fails early, probably in palo. I don't have a boot log as the machine has a graphics console. >> >> ii linux-image-4.13.0-1-parisc64-smp 4.13.13-1 hppa Linux 4.13 for multiprocessor 64-bit PA-RISC >> ii linux-image-4.14.0-1-parisc64-smp 4.14.2-1 hppa Linux 4.14 for multiprocessor 64-bit PA-RISC >> >> The 4.13.13-1 kernel boots okay. >> >> root@hiauly6:/var/log# dpkg -l palo >> ii palo 1.99 hppa Linux boot loader for HP PA-RISC > > > Strange. > It works nicely for me on my C3700 machine: > > > palo ipl 1.99 http://www.parisc-linux.org - Fri, 18 Aug 2017 11:50:44 +0200 > Skipping extended partition 6 - beyond reach of IPL > > Partition Start(MB) End(MB) Id Type > 1 2 33 f0 Palo > 2 34 157 83 ext2 > 5 159 134887 83 ext2 > > PALO(F0) partition contains: > 0/vmlinux64 18847280(0) bytes @ 0x140000 > > Information: No console specified on kernel command line. This is normal. > PALO will choose the console currently used by firmware (serial). > Command line for kernel: 'root=LABEL=ROOT rootfstype=ext4 HOME=/ panic_timeout=60 panic=-1 console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux' > Selected kernel: /vmlinux from partition 2 > Selected ramdisk: /initrd.img from partition 2 > ELF64 executable > Entry 00100000 first 00100000 n 5 > Segment 0 load 00100000 size 463104 mediaptr 0x1000 > Segment 1 load 00172000 size 210976 mediaptr 0x73000 > Segment 2 load 00200000 size 10634416 mediaptr 0xa7000 > Segment 3 load 00c25000 size 3194732 mediaptr 0xacc000 > Segment 4 load 01000000 size 2631320 mediaptr 0xdd8000 Console output stops at the above line. I'm using VisEG console (tty). Also, on rp3440 command line console changed from ttyS1 to ttyS0. Dave -- John David Anglin dave.anglin@xxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
